lkml.org 
[lkml]   [2015]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 8/9] irqchip/GIC: Switch ACPI support to stacked domains
Date
Now that the basic ACPI GSI code is irq domain aware, make sure
that the ACPI support in the GIC doesn't pointlessly deviate from
the DT path.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/irqchip/irq-gic.c | 58 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 45 insertions(+), 13 deletions(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 0e4142d..4f5772d 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -910,8 +910,6 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
{
unsigned long ret = 0;

- if (d->of_node != controller)
- return -EINVAL;
if (intsize < 3)
return -EINVAL;

@@ -979,7 +977,7 @@ static const struct irq_domain_ops gic_irq_domain_ops = {

static void __init __gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
- u32 percpu_offset, struct device_node *node)
+ u32 percpu_offset, struct fwnode_handle *handle)
{
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
@@ -1031,11 +1029,12 @@ static void __init __gic_init_bases(unsigned int gic_nr, int irq_start,
gic_irqs = 1020;
gic->gic_irqs = gic_irqs;

- if (node) { /* DT case */
+ if (handle) { /* DT/ACPI */
+ struct device_node *node = to_of_node(handle);
gic->domain = irq_domain_add_linear(node, gic_irqs,
&gic_irq_domain_hierarchy_ops,
gic);
- } else { /* Non-DT case */
+ } else { /* Legacy support */
/*
* For primary GICs, skip over SGIs.
* For secondary GICs, skip over PPIs, too.
@@ -1058,7 +1057,7 @@ static void __init __gic_init_bases(unsigned int gic_nr, int irq_start,
irq_base = irq_start;
}

- gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+ gic->domain = irq_domain_add_legacy(NULL, gic_irqs, irq_base,
hwirq_base, &gic_irq_domain_ops, gic);
}

@@ -1166,7 +1165,8 @@ gic_of_init(struct device_node *node, struct device_node *parent)
if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
percpu_offset = 0;

- __gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node);
+ __gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
+ &node->fwnode);
if (!gic_cnt)
gic_init_physaddr(node);

@@ -1236,10 +1236,36 @@ gic_acpi_parse_madt_distributor(struct acpi_subtable_header *header,
return 0;
}

+static int gic_acpi_gsi_desc_populate(struct acpi_gsi_descriptor *data,
+ u32 gsi, unsigned int irq_type)
+{
+ /*
+ * Encode GSI and triggering information the way the GIC likes
+ * them.
+ */
+ if (WARN_ON(gsi < 16))
+ return -EINVAL;
+
+ if (gsi >= 32) {
+ data->param[0] = 0; /* SPI */
+ data->param[1] = gsi - 32;
+ data->param[2] = irq_type;
+ } else {
+ data->param[0] = 1; /* PPI */
+ data->param[1] = gsi - 16;
+ data->param[2] = 0xff << 4 | irq_type;
+ }
+
+ data->param_count = 3;
+
+ return 0;
+}
+
int __init
gic_v2_acpi_init(struct acpi_table_header *table)
{
void __iomem *cpu_base, *dist_base;
+ struct fwnode_handle *domain_handle;
int count;

/* Collect CPU base addresses */
@@ -1290,14 +1316,20 @@ gic_v2_acpi_init(struct acpi_table_header *table)
static_key_slow_dec(&supports_deactivate);

/*
- * Initialize zero GIC instance (no multi-GIC support). Also, set GIC
- * as default IRQ domain to allow for GSI registration and GSI to IRQ
- * number translation (see acpi_register_gsi() and acpi_gsi_to_irq()).
+ * Initialize GIC instance zero (no multi-GIC support).
*/
- __gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
- irq_set_default_host(gic_data[0].domain);
+ domain_handle = irq_domain_alloc_fwnode(NULL);
+ if (!domain_handle) {
+ pr_err("Unable to allocate domain handle\n");
+ iounmap(cpu_base);
+ iounmap(dist_base);
+ return -ENOMEM;
+ }
+
+ __gic_init_bases(0, -1, dist_base, cpu_base, 0, domain_handle);

- acpi_irq_model = ACPI_IRQ_MODEL_GIC;
+ acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle,
+ gic_acpi_gsi_desc_populate);
return 0;
}
#endif
--
2.1.4


\
 
 \ /
  Last update: 2015-09-28 19:01    [W:0.164 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site