lkml.org 
[lkml]   [2015]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] mtd: nand: pxa3xx-nand: switch to dmaengine
Sparse has one complaint, but I have no others:

On Sun, Sep 06, 2015 at 03:12:47PM +0200, Robert Jarzmik wrote:
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 2f39bfe34584..1e9d462065e8 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -15,7 +15,9 @@
...
> @@ -564,57 +567,61 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
[...]
> +static void start_data_dma(struct pxa3xx_nand_info *info)
> +{
> + enum dma_data_direction direction;

I think this should be dma_transfer_direction. See warning below.

> + struct dma_async_tx_descriptor *tx;
>
> switch (info->state) {
> case STATE_DMA_WRITING:
> - desc->dsadr = info->data_buff_phys;
> - desc->dtadr = info->mmio_phys + NDDB;
> - desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
> + info->dma_dir = DMA_TO_DEVICE;
> + direction = DMA_MEM_TO_DEV;
> break;
> case STATE_DMA_READING:
> - desc->dtadr = info->data_buff_phys;
> - desc->dsadr = info->mmio_phys + NDDB;
> - desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
> + info->dma_dir = DMA_FROM_DEVICE;
> + direction = DMA_DEV_TO_MEM;
> break;
> default:
> dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
> info->state);
> BUG();
> }
> -
> - DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
> - DDADR(info->data_dma_ch) = info->data_desc_addr;
> - DCSR(info->data_dma_ch) |= DCSR_RUN;
> -}
> -
> -static void pxa3xx_nand_data_dma_irq(int channel, void *data)
> -{
> - struct pxa3xx_nand_info *info = data;
> - uint32_t dcsr;
> -
> - dcsr = DCSR(channel);
> - DCSR(channel) = dcsr;
> -
> - if (dcsr & DCSR_BUSERR) {
> - info->retcode = ERR_DMABUSERR;
> + info->sg.length = info->data_size +
> + (info->oob_size ? info->spare_size + info->ecc_size : 0);
> + dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
> +
> + tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
> + DMA_PREP_INTERRUPT);

drivers/mtd/nand/pxa3xx_nand.c:631:68: warning: mixing different enum types [sparse]
drivers/mtd/nand/pxa3xx_nand.c:631:68: int enum dma_data_direction versus [sparse]
drivers/mtd/nand/pxa3xx_nand.c:631:68: int enum dma_transfer_direction [sparse]

> + if (!tx) {
> + dev_err(&info->pdev->dev, "prep_slave_sg() failed\n");
> + return;
> }
> -
> - info->state = STATE_DMA_DONE;
> - enable_int(info, NDCR_INT_MASK);
> - nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
> + tx->callback = pxa3xx_nand_data_dma_irq;
> + tx->callback_param = info;
> + info->dma_cookie = dmaengine_submit(tx);
> + dma_async_issue_pending(info->dma_chan);
> + dev_dbg(&info->pdev->dev, "%s(dir=%d cookie=%x size=%u)\n",
> + __func__, direction, info->dma_cookie, info->sg.length);
> }
> -#else
> -static void start_data_dma(struct pxa3xx_nand_info *info)
> -{}
> -#endif
[...]

Brian


\
 
 \ /
  Last update: 2015-09-28 02:41    [W:0.141 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site