lkml.org 
[lkml]   [2015]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ASoC: sgtl5000: fix bad register MIC_BIAS_VOLTAGE setup on probe
On Fri, Sep 25, 2015 at 04:21:27PM +0200, Gianluca Renzi wrote:

> snd_soc_update_bits(codec, SGTL5000_CHIP_MIC_CTRL,
> SGTL5000_BIAS_R_MASK,
> - sgtl5000->micbias_voltage << SGTL5000_BIAS_R_SHIFT);
> + sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT);

That doesn't look right... I would expect _BIAS_R_SHIFT to shift a
value into the register masked off by _BIAS_R_MASK and therefore that
the above is saying that the definition of one of those two macros is
wrong. I would not expect something called _BIAS_VOLT_SHIFT here.

What's going on here?

> @@ -1549,7 +1549,7 @@ static int sgtl5000_i2c_probe(struct i2c
> else {
> sgtl5000->micbias_voltage = 0;
> dev_err(&client->dev,
> - "Unsuitable MicBias resistor\n");
> + "Unsuitable MicBias voltage\n");
> }

This looks like a reasonable but unrelated fix and should be in a
separate patch.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-09-25 19:21    [W:0.029 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site