lkml.org 
[lkml]   [2015]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: at91/dt: pullup dbgu rx instead of tx
On 24/09/2015 at 17:22:54 +0200, Peter Rosin wrote :
> I just noticed that other ports have the same problem in sama5d3.dtsi. E.g.
>
> uart1 {
> pinctrl_uart1: uart1-0 {
> atmel,pins =
> <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE /* conflicts with TWD0, ISI_VSYNC */
> AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* conflicts with TWCK0, ISI_HSYNC */
> };
> };
>
> Given that the original bug I found spread all over the map, it seems
> like someone was confused when the pull-ups were originally added.
> Someone (else?) at Atmel needs to audit this so that pull-ups are
> added on the rx-pins instead of the tx-pins.
>

Sure, that is the plan!
Thanks again for the report.

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-09-24 18:41    [W:0.068 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site