lkml.org 
[lkml]   [2015]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 15/24] dmaengine: edma: Use dev_dbg instead pr_debug
Date
We have access to dev, so it is better to use the dev_dbg for debug prints.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/dma/edma.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 2332142c36db..fe8cde21b497 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -655,14 +655,14 @@ static int edma_start(struct edma_cc *ecc, unsigned channel)

/* EDMA channels without event association */
if (test_bit(channel, ecc->edma_unused)) {
- pr_debug("EDMA: ESR%d %08x\n", j,
- edma_shadow0_read_array(ecc, SH_ESR, j));
+ dev_dbg(ecc->dev, "ESR%d %08x\n", j,
+ edma_shadow0_read_array(ecc, SH_ESR, j));
edma_shadow0_write_array(ecc, SH_ESR, j, mask);
return 0;
}

/* EDMA channel with event association */
- pr_debug("EDMA: ER%d %08x\n", j,
+ dev_dbg(ecc->dev, "ER%d %08x\n", j,
edma_shadow0_read_array(ecc, SH_ER, j));
/* Clear any pending event or error */
edma_write_array(ecc, EDMA_ECR, j, mask);
@@ -670,8 +670,8 @@ static int edma_start(struct edma_cc *ecc, unsigned channel)
/* Clear any SER */
edma_shadow0_write_array(ecc, SH_SECR, j, mask);
edma_shadow0_write_array(ecc, SH_EESR, j, mask);
- pr_debug("EDMA: EER%d %08x\n", j,
- edma_shadow0_read_array(ecc, SH_EER, j));
+ dev_dbg(ecc->dev, "EER%d %08x\n", j,
+ edma_shadow0_read_array(ecc, SH_EER, j));
return 0;
}

@@ -709,8 +709,8 @@ static void edma_stop(struct edma_cc *ecc, unsigned channel)
/* clear possibly pending completion interrupt */
edma_shadow0_write_array(ecc, SH_ICR, j, mask);

- pr_debug("EDMA: EER%d %08x\n", j,
- edma_shadow0_read_array(ecc, SH_EER, j));
+ dev_dbg(ecc->dev, "EER%d %08x\n", j,
+ edma_shadow0_read_array(ecc, SH_EER, j));

/* REVISIT: consider guarding against inappropriate event
* chaining by overwriting with dummy_paramset.
@@ -779,8 +779,8 @@ static int edma_trigger_channel(struct edma_cc *ecc, unsigned channel)

edma_shadow0_write_array(ecc, SH_ESR, (channel >> 5), mask);

- pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
- edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
+ dev_dbg(ecc->dev, "ESR%d %08x\n", (channel >> 5),
+ edma_shadow0_read_array(ecc, SH_ESR, (channel >> 5)));
return 0;
}

@@ -810,8 +810,8 @@ static void edma_clean_channel(struct edma_cc *ecc, unsigned channel)
int j = (channel >> 5);
unsigned int mask = BIT(channel & 0x1f);

- pr_debug("EDMA: EMR%d %08x\n", j,
- edma_read_array(ecc, EDMA_EMR, j));
+ dev_dbg(ecc->dev, "EMR%d %08x\n", j,
+ edma_read_array(ecc, EDMA_EMR, j));
edma_shadow0_write_array(ecc, SH_ECR, j, mask);
/* Clear the corresponding EMR bits */
edma_write_array(ecc, EDMA_EMCR, j, mask);
--
2.5.2


\
 
 \ /
  Last update: 2015-09-22 12:21    [W:0.127 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site