lkml.org 
[lkml]   [2015]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/4] powerpc/device-tree: bindings for DSP cores/clusters for Freescale SOCs
Date


> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Sunday, September 20, 2015 5:45 AM
> To: Aggrwal Poonam-B10812 <Poonam.Aggrwal@freescale.com>
> Cc: linuxppc-dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; devicetree-
> discuss@lists.ozlabs.org
> Subject: Re: [PATCH 2/4] powerpc/device-tree: bindings for DSP
> cores/clusters for Freescale SOCs
>
> On Sat, 2015-09-19 at 23:46 +0530, Poonam Aggrwal wrote:
> > From: poonam aggrwal <poonam.aggrwal@freescale.com>
> >
> > Device Tree Bindings for DSP CPU clusters and DSP CPUs for Freescale
> > PowerPC SOCs which have DSP CPUs in addition to PowerPC CPUs.
> > For example B4860 has 3 DSP clusters which have 2 SC3900 cores each.
> >
> > Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
> > ---
> > - based of: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > branch master
> >
> > This patch was sent earlier and some comments were received. Some have
> > been taken care; others we can further discuss. Apologize for not
> > following up on them in time.
> > .../devicetree/bindings/powerpc/fsl/dsp-cpus.txt | 78
> > ++++++++++++++++++++++
> > 1 file changed, 78 insertions(+)
> > create mode 100644
> Documentation/devicetree/bindings/powerpc/fsl/dsp-
> > cpus.txt
> >
> > diff --git
> > a/Documentation/devicetree/bindings/powerpc/fsl/dsp-cpus.txt
> > b/Documentation/devicetree/bindings/powerpc/fsl/dsp-cpus.txt
> > new file mode 100644
> > index 0000000..6d901ef
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/powerpc/fsl/dsp-cpus.txt
> > @@ -0,0 +1,78 @@
> >
> +=========================================================
> ==========
> > +Binding for DSP CPU clusters and DSP CPUs for Freescale SOCs which
> > +have DSP CPUs in addition to PowerPC cpus.
> > +Copyright 2013 Freescale Semiconductor Inc.
> > +
> > +Power Architecture CPUs in Freescale SOCs are represented in device
> > +trees
> > as
> > +per the definition in ePAPR.
> > +
> > +Required properties for DSP CPU cluster:
> > +- compatible : should be "fsl,sc3900-cluster".
> > +- reg : should contain the cluster index
> > +
> > +Required properties for DSP CPU:
> > +- compatible : should be "fsl,sc3900".
> > +- reg : should contain index of DSP CPU within the DSP clsuter.
> > +- next-level-cache : should point to the phandle of the next-level L2
> > cache.
>
> Why is the dsp-clusters container only shown in the example, not the binding
> itself?

I will try to add more description in the binding for cluster; And the structure of dsp cluster (like sub node of DSP cluster is core, etc).
Did I get your feedback right?
>
> -Scott

\
 
 \ /
  Last update: 2015-09-21 11:01    [W:2.691 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site