lkml.org 
[lkml]   [2015]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: dts: add dts files for Hisilicon Hip05-D02 Development Board
[Don't top-post, this is very annoying]

On 02/09/15 05:28, Ding Tianhong wrote:
> Hi,Marc:
>
> Can you check this, I am not sure whether the GIC_CPU_MASK_SIMPLE(xx)
> is used for gic-v3, maybe we should remove it, thanks.

The binding documentation
(Documentation/devicetree/bindings/arm/gic-v3.txt) is very clear:

The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = edge triggered
4 = level triggered

There is no mask whatsoever, because that would restrict the interrupt
to only 32 CPUs at most.

So please remove this, this is just wrong.

Thanks,

M.

> Ding
>
> On 2015/8/31 21:44, Ding Tianhong wrote:
>> On 2015/8/31 21:12, Leo Yan wrote:
>>> On Sat, Aug 29, 2015 at 04:52:41PM +0800, Ding Tianhong wrote:
>>>> Add initial dtsi file to support Hisilicon Hip05-D02 Board with
>>>> support of CPUs in four clusters and each cluster has quard Cortex-A57.
>>>>
>>>> Also add dts file to support Hip05-D02 development board.
>>>>
>>>> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
>>>> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
>>>> ---
>>>> arch/arm64/boot/dts/hisilicon/Makefile | 2 +-
>>>> arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++
>>>> arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++
>>>> 3 files changed, 308 insertions(+), 1 deletion(-)
>>>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>>
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
>>>> index fa81a6e..cd158b8 100644
>>>> --- a/arch/arm64/boot/dts/hisilicon/Makefile
>>>> +++ b/arch/arm64/boot/dts/hisilicon/Makefile
>>>> @@ -1,4 +1,4 @@
>>>> -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
>>>> +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
>>>>
>>>> always := $(dtb-y)
>>>> subdir-y := $(dts-dirs)
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> new file mode 100644
>>>> index 0000000..ae34e25
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
>>>> @@ -0,0 +1,36 @@
>>>> +/**
>>>> + * dts file for Hisilicon D02 Development Board
>>>> + *
>>>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * publishhed by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include "hip05.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "Hisilicon Hip05 D02 Development Board";
>>>> + compatible = "hisilicon,hip05-d02";
>>>> +
>>>> + memory@00000000 {
>>>> + device_type = "memory";
>>>> + reg = <0x0 0x00000000 0x0 0x80000000>;
>>>> + };
>>>> +
>>>> + aliases {
>>>> + serial0 = &uart0;
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:115200n8";
>>>> + };
>>>> +};
>>>> +
>>>> +&uart0 {
>>>> + status = "ok";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>> new file mode 100644
>>>> index 0000000..da12d94
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
>>>> @@ -0,0 +1,271 @@
>>>> +/**
>>>> + * dts file for Hisilicon D02 Development Board
>>>> + *
>>>> + * Copyright (C) 2014,2015 Hisilicon Ltd.
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * publishhed by the Free Software Foundation.
>>>> + *
>>>> + */
>>>> +
>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>> +
>>>> +/ {
>>>> + compatible = "hisilicon,hip05-d02";
>>>> + interrupt-parent = <&gic>;
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> +
>>>> + psci {
>>>> + compatible = "arm,psci-0.2";
>>>> + method = "smc";
>>>> + };
>>>> +
>>>> + cpus {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + cpu-map {
>>>> + cluster0 {
>>>> + core0 {
>>>> + cpu = <&cpu0>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu1>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu2>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu3>;
>>>> + };
>>>> + };
>>>> + cluster1 {
>>>> + core0 {
>>>> + cpu = <&cpu4>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu5>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu6>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu7>;
>>>> + };
>>>> + };
>>>> + cluster2 {
>>>> + core0 {
>>>> + cpu = <&cpu8>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu9>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu10>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu11>;
>>>> + };
>>>> + };
>>>> + cluster3 {
>>>> + core0 {
>>>> + cpu = <&cpu12>;
>>>> + };
>>>> + core1 {
>>>> + cpu = <&cpu13>;
>>>> + };
>>>> + core2 {
>>>> + cpu = <&cpu14>;
>>>> + };
>>>> + core3 {
>>>> + cpu = <&cpu15>;
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + cpu0: cpu@20000 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>
>>> Change to "arm,cortex-a57","arm,armv8"?
>>>
>>
>> Ok,but I think should be "hisilicon,hip05","arm,armv8".
>>
>>>> + reg = <0x20000>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu1: cpu@20001 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20001>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu2: cpu@20002 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20002>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu3: cpu@20003 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20003>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu4: cpu@20100 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20100>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu5: cpu@20101 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20101>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu6: cpu@20102 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20102>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu7: cpu@20103 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20103>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu8: cpu@20200 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20200>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu9: cpu@20201 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20201>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu10: cpu@20202 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20202>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu11: cpu@20203 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20203>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu12: cpu@20300 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20300>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu13: cpu@20301 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20301>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu14: cpu@20302 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20302>;
>>>> + enable-method = "psci";
>>>> + };
>>>> +
>>>> + cpu15: cpu@20303 {
>>>> + device_type = "cpu";
>>>> + compatible = "arm,armv8";
>>>> + reg = <0x20303>;
>>>> + enable-method = "psci";
>>>> + };
>>>> + };
>>>> +
>>>> + gic: interrupt-controller@8d000000 {
>>>> + compatible = "arm,gic-v3";
>>>> + #interrupt-cells = <3>;
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> + ranges;
>>>> + interrupt-controller;
>>>> + #redistributor-regions = <1>;
>>>> + redistributor-stride = <0x0 0x30000>;
>>>> + reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
>>>> + <0x0 0x8d100000 0 0x300000>, /* GICR */
>>>> + <0x0 0xfe000000 0 0x10000>, /* GICC */
>>>> + <0x0 0xfe010000 0 0x10000>, /* GICH */
>>>> + <0x0 0xfe020000 0 0x10000>; /* GICV */
>>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>>>> +
>>>> + its_totems: interrupt-controller@8c000000 {
>>>> + compatible = "arm,gic-v3-its";
>>>> + msi-controller;
>>>> + reg = <0x0 0x8c000000 0x0 0x1000000>;
>>>> + };
>>>> + };
>>>> +
>>>> + timer {
>>>> + compatible = "arm,armv8-timer";
>>>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>>>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>>>
>>> Here have a question:
>>> In devcie tree binding file: Documentation/devicetree/bindings/arm/gic.txt,
>>> it only considers for maximum 8 cpus. So will we need change the
>>> binding file and also use GIC_CPU_MASK_SIMPLE(16) for 16 cores?
>>>
>>
>> Looks like should updtate gic.txt and use the GIC_CPU_MASK_SIMPLE(16) for 16 cores.
>>
>> Ding
>>
>>>> + };
>>>> +
>>>> + pmu {
>>>> + compatible = "arm,armv8-pmuv3";
>>>> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
>>>> + };
>>>> +
>>>> + soc {
>>>> + compatible = "simple-bus";
>>>> + #address-cells = <2>;
>>>> + #size-cells = <2>;
>>>> + ranges;
>>>> +
>>>> + refclk200mhz: refclk200mhz {
>>>> + compatible = "fixed-clock";
>>>> + #clock-cells = <0>;
>>>> + clock-frequency = <200000000>;
>>>> + };
>>>> +
>>>> + uart0: uart@80300000 {
>>>> + compatible = "snps,dw-apb-uart";
>>>> + reg = <0x0 0x80300000 0x0 0x10000>;
>>>> + interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
>>>> + clocks = <&refclk200mhz>;
>>>> + clock-names = "apb_pclk";
>>>> + reg-shift = <2>;
>>>> + reg-io-width = <4>;
>>>> + status = "disabled";
>>>> + };
>>>> +
>>>> + uart1: uart@80310000 {
>>>> + compatible = "snps,dw-apb-uart";
>>>> + reg = <0x0 0x80310000 0x0 0x10000>;
>>>> + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
>>>> + clocks = <&refclk200mhz>;
>>>> + clock-names = "apb_pclk";
>>>> + reg-shift = <2>;
>>>> + reg-io-width = <4>;
>>>> + status = "disabled";
>>>> + };
>>>> + };
>>>> +};
>>>> --
>>>> 1.9.0
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> linux-arm-kernel mailing list
>>>> linux-arm-kernel@lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>>> .
>>>
>>
>>
>> _______________________________________________
>> linuxarm mailing list
>> linuxarm@huawei.com
>> http://rnd-openeuler.huawei.com/mailman/listinfo/linuxarm
>>
>
>


--
Jazz is not dead. It just smells funny...


\
 
 \ /
  Last update: 2015-09-02 10:21    [W:0.116 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site