lkml.org 
[lkml]   [2015]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/9] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS
Date
From: Nariman Poushin <nariman@opensource.wolfsonmicro.com>

The polarity of MICD_CLAMP_STS does not change when different clamp
modes are used, this patch corrects this issue.

Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/extcon/extcon-arizona.c | 5 +----
1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 6d35147b..ece5892 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)

if (arizona->pdata.jd_gpio5) {
mask = ARIZONA_MICD_CLAMP_STS;
- if (arizona->pdata.jd_invert)
- present = ARIZONA_MICD_CLAMP_STS;
- else
- present = 0;
+ present = 0;
} else {
mask = ARIZONA_JD1_STS;
if (arizona->pdata.jd_invert)
--
1.7.2.5


\
 
 \ /
  Last update: 2015-09-16 12:41    [W:0.091 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site