lkml.org 
[lkml]   [2015]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] Arizona Extcon Bug Fixes and Improvements
Date
Hi,

Ok I have split these patches out into 2 chains; this chain
contains no device tree changes so that should let us merge
these now and at least get the benefit of the bug fixes
etc. whilst we work on getting the necessary ACKs for the
DT changes. The DT changes themselves should be simpler to
merge as there are no build dependencies there between the
extcon and MFD patches so they can just each go through
their respective trees. Whereas this chain needs to all go
through one tree.

These patches add support for the ADC mode microphone
detection, and the general purpose switch for pop
suppression. The bug fixes include fixing the headphone
detection accuracy at the top end of the range and some
corrections around the use of the microphone clamps.

Thanks,
Charles

Charles Keepax (8):
mfd: arizona: Add registers for ADC microphone detection
mfd: arizona: Add register bits for general purpose switch
mfd: arizona: Add TST_CAP bits for headphone detection
extcon: arizona: Add support for new ADC value mic detect
extcon: arizona: Add support for general purpose switch
extcon: arizona: Additional settings to improve accuracy of HP detect
extcon: arizona: Use the micd_clamp for interrupts if it is available
extcon: arizona: Don't disable debounce for inverted jacks

Nariman Poushin (1):
extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS

drivers/extcon/extcon-arizona.c | 106 +++++++++++++++++++++++++++------
drivers/mfd/wm5110-tables.c | 6 ++
include/dt-bindings/mfd/arizona.h | 2 +
include/linux/mfd/arizona/pdata.h | 6 ++
include/linux/mfd/arizona/registers.h | 14 ++++-
5 files changed, 113 insertions(+), 21 deletions(-)

--
1.7.2.5



\
 
 \ /
  Last update: 2015-09-16 12:21    [W:0.083 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site