lkml.org 
[lkml]   [2015]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v5 3/4] mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
From
On 9 September 2015 at 15:24, Ezequiel Garcia
<ezequiel@vanguardiasur.com.ar> wrote:
> On 08 Sep 10:10 AM, Alex Smith wrote:
>> Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
>> well as the hardware BCH controller. DMA is not currently implemented.
>>
>> While older 47xx SoCs also have a BCH controller, they are incompatible
>> with the one in the 4780 due to differing register/bit positions, which
>> would make implementing a common driver for them quite messy.
>>
>> Signed-off-by: Alex Smith <alex.smith@imgtec.com>
>> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
>> Cc: David Woodhouse <dwmw2@infradead.org>
>> Cc: Brian Norris <computersforpeace@gmail.com>
>> Cc: linux-mtd@lists.infradead.org
>> Cc: linux-kernel@vger.kernel.org
>> ---
>> v4 -> v5:
>> - Bump RB_DELAY up to be sufficient for the driver to work without a
>> busy GPIO available.
>> - Use readl_poll_timeout instead of custom polling loop.
>> - Remove useless printks.
>> - Change a BUG_ON to WARN_ON.
>> - Remove use of of_translate_address(), use standard platform resource
>> APIs.
>> - Add DRV_NAME define to avoid duplication of the same string.
>>
>> v3 -> v4:
>> - Rebase to 4.2-rc4
>> - Change ECC_HW_OOB_FIRST to ECC_HW, reading OOB first is not necessary.
>> - Fix argument to get_device() in jz4780_bch_get()
>>
>> v2 -> v3:
>> - Rebase to 4.0-rc6
>> - Reflect binding changes
>> - get/put_device in bch get/release
>> - Removed empty .remove() callback
>> - Removed .owner
>> - Set mtd->dev.parent
>>
>> v1 -> v2:
>> - Fixed module license macro
>> - Rebase to 4.0-rc3
>> ---
>> drivers/mtd/nand/Kconfig | 7 +
>> drivers/mtd/nand/Makefile | 1 +
>> drivers/mtd/nand/jz4780_bch.c | 348 +++++++++++++++++++++++++++++++++++++
>> drivers/mtd/nand/jz4780_bch.h | 42 +++++
>> drivers/mtd/nand/jz4780_nand.c | 378 +++++++++++++++++++++++++++++++++++++++++
>> 5 files changed, 776 insertions(+)
>> create mode 100644 drivers/mtd/nand/jz4780_bch.c
>> create mode 100644 drivers/mtd/nand/jz4780_bch.h
>> create mode 100644 drivers/mtd/nand/jz4780_nand.c
>>
> [..]
>> +
>> +static int jz4780_nand_init_chips(struct jz4780_nand *nand,
>> + struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct jz4780_nand_chip *chip;
>> + const __be32 *prop;
>> + struct resource *res;
>> + int i = 0;
>> +
>> + /*
>> + * Iterate over each bank assigned to this device and request resources.
>> + * The bank numbers may not be consecutive, but nand_scan_ident()
>> + * expects chip numbers to be, so fill out a consecutive array of chips
>> + * which map chip number to actual bank number.
>> + */
>> + while ((prop = of_get_address(dev->of_node, i, NULL, NULL))) {
>> + chip = &nand->chips[i];
>> + chip->bank = of_read_number(prop, 1);
>> +
>> + jz4780_nemc_set_type(nand->dev, chip->bank,
>> + JZ4780_NEMC_BANK_NAND);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, i);
>> + chip->base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(chip->base)) {
>> + dev_err(dev, "failed to map bank %u: %ld\n",
>> + chip->bank, PTR_ERR(chip->base));
>
> You don't need to print anything on devm_ioremap_resource errors.
>
> The rest looks good:
>
> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>

Thanks Ezequiel, I'll resend with the printk removed soon.

Alex

> --
> Ezequiel Garcia, VanguardiaSur
> www.vanguardiasur.com.ar


\
 
 \ /
  Last update: 2015-09-15 12:01    [W:0.162 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site