lkml.org 
[lkml]   [2015]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/6] ARM: dts: set up trigger type for edt-ft5x06 interrupts
On Sat, Sep 12, 2015 at 10:45:51AM -0700, Dmitry Torokhov wrote:
> Now that the driver respects IRQ trigger settings from device tree, let's
> fix them up in individual DTSes (note that the driver is still compatible
> with older DTSes).
>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
> arch/arm/boot/dts/am437x-sk-evm.dts | 2 +-
> arch/arm/boot/dts/imx28-tx28.dts | 3 ++-
> arch/arm/boot/dts/imx53-tx53-x03x.dts | 3 ++-
> arch/arm/boot/dts/imx6qdl-tx6.dtsi | 3 ++-
> 4 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> index c17097d..d83fdcd 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -471,7 +471,7 @@
>
> reg = <0x38>;
> interrupt-parent = <&gpio0>;
> - interrupts = <31 0>;
> + interrupts = <31 IRQ_TYPE_EDGE_FALLING>;

for AM437x SK:

Acked-by: Felipe Balbi <balbi@ti.com>

Seems like there are no changes considering driver was always using
IRQF_TRIGGER_FALLING.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2015-09-14 23:41    [W:0.078 / U:5.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site