lkml.org 
[lkml]   [2015]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 4/5] CPM: modify cpm_muram_* functions
Date
CPM and QE have the same muram, shared the same
muram management functions. Delete cpm_muram_* functions,
using qe_muram_*.

Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com>
---
Changes for v9:
- splitted from patch 3/5, modify cpm muram management functions.

arch/powerpc/include/asm/cpm.h | 59 ----------------
arch/powerpc/include/asm/qe.h | 8 +++
arch/powerpc/sysdev/cpm_common.c | 141 +--------------------------------------
3 files changed, 9 insertions(+), 199 deletions(-)

diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4398a6c..003a736 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -93,22 +93,6 @@ typedef struct cpm_buf_desc {
*/

#define BD_SC_EMPTY (0x8000) /* Receive is empty */
-#define BD_SC_READY (0x8000) /* Transmit is ready */
-#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
-#define BD_SC_LAST (0x0800) /* Last buffer in frame */
-#define BD_SC_TC (0x0400) /* Transmit CRC */
-#define BD_SC_CM (0x0200) /* Continuous mode */
-#define BD_SC_ID (0x0100) /* Rec'd too many idles */
-#define BD_SC_P (0x0100) /* xmt preamble */
-#define BD_SC_BR (0x0020) /* Break received */
-#define BD_SC_FR (0x0010) /* Framing error */
-#define BD_SC_PR (0x0008) /* Parity error */
-#define BD_SC_NAK (0x0004) /* NAK - did not respond */
-#define BD_SC_OV (0x0002) /* Overrun */
-#define BD_SC_UN (0x0002) /* Underrun */
-#define BD_SC_CD (0x0001) /* */
-#define BD_SC_CL (0x0001) /* Collision */

/* Buffer descriptor control/status used by Ethernet receive.
* Common to SCC and FCC.
@@ -155,49 +139,6 @@ typedef struct cpm_buf_desc {
*/
#define BD_I2C_START (0x0400)

-int cpm_muram_init(void);
-
-#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-#else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
- unsigned long align)
-{
- return -ENOSYS;
-}
-
-static inline int cpm_muram_free(unsigned long offset)
-{
- return -ENOSYS;
-}
-
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
- unsigned long size)
-{
- return -ENOSYS;
-}
-
-static inline void __iomem *cpm_muram_addr(unsigned long offset)
-{
- return NULL;
-}
-
-static inline unsigned long cpm_muram_offset(void __iomem *addr)
-{
- return -ENOSYS;
-}
-
-static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
- return 0;
-}
-#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
-
#ifdef CONFIG_CPM
int cpm_command(u32 command, u8 opcode);
#else
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 3af9033..aee968f 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -189,6 +189,14 @@ static inline int qe_alive_during_sleep(void)
#endif
}

+/* we actually use qe_muram implementation, define this for convenience */
+#define cpm_muram_init qe_muram_init
+#define cpm_muram_alloc qe_muram_alloc
+#define cpm_muram_alloc_fixed qe_muram_alloc_fixed
+#define cpm_muram_free qe_muram_free
+#define cpm_muram_addr qe_muram_addr
+#define cpm_muram_offset qe_muram_offset
+
int qe_muram_init(void);

#if defined(CONFIG_QUICC_ENGINE)
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 4f78695..328c3ec 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -27,8 +27,8 @@

#include <asm/udbg.h>
#include <asm/io.h>
-#include <asm/rheap.h>
#include <asm/cpm.h>
+#include <asm/qe.h>

#include <mm/mmu_decl.h>

@@ -65,151 +65,12 @@ void __init udbg_init_cpm(void)
}
#endif

-static spinlock_t cpm_muram_lock;
-static rh_block_t cpm_boot_muram_rh_block[16];
-static rh_info_t cpm_muram_info;
static u8 __iomem *muram_vbase;
static phys_addr_t muram_pbase;

/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4

-int cpm_muram_init(void)
-{
- struct device_node *np;
- struct resource r;
- u32 zero[OF_MAX_ADDR_CELLS] = {};
- resource_size_t max = 0;
- int i = 0;
- int ret = 0;
-
- if (muram_pbase)
- return 0;
-
- spin_lock_init(&cpm_muram_lock);
- /* initialize the info header */
- rh_init(&cpm_muram_info, 1,
- sizeof(cpm_boot_muram_rh_block) /
- sizeof(cpm_boot_muram_rh_block[0]),
- cpm_boot_muram_rh_block);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
- if (!np) {
- /* try legacy bindings */
- np = of_find_node_by_name(NULL, "data-only");
- if (!np) {
- printk(KERN_ERR "Cannot find CPM muram data node");
- ret = -ENODEV;
- goto out;
- }
- }
-
- muram_pbase = of_translate_address(np, zero);
- if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
- printk(KERN_ERR "Cannot translate zero through CPM muram node");
- ret = -ENODEV;
- goto out;
- }
-
- while (of_address_to_resource(np, i++, &r) == 0) {
- if (r.end > max)
- max = r.end;
-
- rh_attach_region(&cpm_muram_info, r.start - muram_pbase,
- resource_size(&r));
- }
-
- muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
- if (!muram_vbase) {
- printk(KERN_ERR "Cannot map CPM muram");
- ret = -ENOMEM;
- }
-
-out:
- of_node_put(np);
- return ret;
-}
-
-/**
- * cpm_muram_alloc - allocate the requested size worth of multi-user ram
- * @size: number of bytes to allocate
- * @align: requested alignment, in bytes
- *
- * This function returns an offset into the muram area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_muram_lock, flags);
- cpm_muram_info.alignment = align;
- start = rh_alloc(&cpm_muram_info, size, "commproc");
- memset(cpm_muram_addr(start), 0, size);
- spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc);
-
-/**
- * cpm_muram_free - free a chunk of multi-user ram
- * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
- */
-int cpm_muram_free(unsigned long offset)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_muram_lock, flags);
- ret = rh_free(&cpm_muram_info, offset);
- spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(cpm_muram_free);
-
-/**
- * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
- * @offset: the offset into the muram area to reserve
- * @size: the number of bytes to reserve
- *
- * This function returns "start" on success, -ENOMEM on failure.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
-{
- unsigned long start;
- unsigned long flags;
-
- spin_lock_irqsave(&cpm_muram_lock, flags);
- cpm_muram_info.alignment = 1;
- start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc");
- spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
- return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-
-/**
- * cpm_muram_addr - turn a muram offset into a virtual address
- * @offset: muram offset to convert
- */
-void __iomem *cpm_muram_addr(unsigned long offset)
-{
- return muram_vbase + offset;
-}
-EXPORT_SYMBOL(cpm_muram_addr);
-
-unsigned long cpm_muram_offset(void __iomem *addr)
-{
- return addr - (void __iomem *)muram_vbase;
-}
-EXPORT_SYMBOL(cpm_muram_offset);
-
/**
* cpm_muram_dma - turn a muram virtual address into a DMA address
* @offset: virtual address from cpm_muram_addr() to convert
--
2.1.0.27.g96db324


\
 
 \ /
  Last update: 2015-09-14 04:01    [W:0.064 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site