lkml.org 
[lkml]   [2015]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] ARM: dts: Fix LEDs on exynos5422-odroidxu3
Date
The LEDs on Odroid XU3 family boards could not properly probe because PWM
outputs were reduced only to PWM for fan. Fix it for Odroid XU3 and
XU3-Lite boards by switching to usage of all 4 outputs (although the PWM
for MIPI probably is redundant because board does not have MIPI
connector available).

This fixes warnings on dmesg:
[ 4.838712] samsung-pwm 12dd0000.pwm: tried to request PWM channel 1 without output
[ 4.838725] leds_pwm pwmleds: unable to request PWM for green:mmc0: -22
[ 4.838767] leds_pwm: probe of pwmleds failed with error -22

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>

---

Changes since v1:
1. Do not rebase on patchset adding support for Odroid XU4 board. Rebase
just on current next.
---
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index dd8bc86d9de4..90d298dce851 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -473,7 +473,6 @@
*/
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
pinctrl-names = "default";
- samsung,pwm-outputs = <0>;
status = "okay";
};

--
2.1.4


\
 
 \ /
  Last update: 2015-09-13 12:01    [W:5.389 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site