lkml.org 
[lkml]   [2015]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.1 45/78] Revert "libata: Implement support for sense data reporting"
Date
4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 84ded2f8e7dda336fc2fb3570726ceb3b3b3590f upstream.

This reverts commit fe7173c206de63fc28475ee6ae42ff95c05692de.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by
later changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/ata/libata-core.c | 20 ----------
drivers/ata/libata-eh.c | 86 +---------------------------------------------
include/linux/ata.h | 16 --------
3 files changed, 4 insertions(+), 118 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata
return 0;
}

-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
- unsigned int err_mask;
-
- if (!ata_id_has_sense_reporting(dev->id))
- return;
-
- if (ata_id_sense_reporting_enabled(dev->id))
- return;
-
- err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
- if (err_mask) {
- ata_dev_dbg(dev,
- "failed to enable Sense Data Reporting, Emask 0x%x\n",
- err_mask);
- }
-}
-
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device
dev->devslp_timing[i] = sata_setting[j];
}
}
- ata_dev_config_sense_reporting(dev);
+
dev->cdb_len = 16;
}

--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1630,70 +1630,6 @@ unsigned int atapi_eh_tur(struct ata_dev
}

/**
- * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- * @dfl_sense_key: default sense key to use
- *
- * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- * SENSE. This function is EH helper.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * encoded sense data on success, 0 on failure or if sense data
- * is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
- struct scsi_cmnd *cmd)
-{
- struct ata_device *dev = qc->dev;
- struct ata_taskfile tf;
- unsigned int err_mask;
-
- if (!cmd)
- return 0;
-
- DPRINTK("ATA request sense\n");
- ata_dev_warn(dev, "request sense\n");
- if (!ata_id_sense_reporting_enabled(dev->id)) {
- ata_dev_warn(qc->dev, "sense data reporting disabled\n");
- return 0;
- }
- ata_tf_init(dev, &tf);
-
- tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
- tf.command = ATA_CMD_REQ_SENSE_DATA;
- tf.protocol = ATA_PROT_NODATA;
-
- err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
- /*
- * ACS-4 states:
- * The device may set the SENSE DATA AVAILABLE bit to one in the
- * STATUS field and clear the ERROR bit to zero in the STATUS field
- * to indicate that the command returned completion without an error
- * and the sense data described in table 306 is available.
- *
- * IOW the 'ATA_SENSE' bit might not be set even though valid
- * sense data is available.
- * So check for both.
- */
- if ((tf.command & ATA_SENSE) ||
- tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
- ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
- qc->flags |= ATA_QCFLAG_SENSE_VALID;
- ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
- tf.lbah, tf.lbam, tf.lbal);
- } else {
- ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
- tf.command, err_mask);
- }
- return err_mask;
-}
-
-/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
* @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1896,22 +1832,7 @@ static unsigned int ata_eh_analyze_tf(st
return ATA_EH_RESET;
}

- /*
- * Sense data reporting does not work if the
- * device fault bit is set.
- */
- if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
- !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
- if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = ata_eh_request_sense(qc, qc->scsicmd);
- if (tmp)
- qc->err_mask |= tmp;
- } else {
- ata_dev_warn(qc->dev, "sense data available but port frozen\n");
- }
- }
-
- /* Set by NCQ autosense or request sense above */
+ /* Set by NCQ autosense */
if (qc->flags & ATA_QCFLAG_SENSE_VALID)
return 0;

@@ -2658,15 +2579,14 @@ static void ata_eh_link_report(struct at

#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
- ATA_SENSE | ATA_ERR)) {
+ ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
- res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}

--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -385,8 +385,6 @@ enum {
SATA_SSP = 0x06, /* Software Settings Preservation */
SATA_DEVSLP = 0x09, /* Device Sleep */

- SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
-
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
ATA_SET_MAX_PASSWD = 0x01,
@@ -710,20 +708,6 @@ static inline bool ata_id_has_read_log_d
return id[ATA_ID_COMMAND_SET_3] & (1 << 3);
}

-static inline bool ata_id_has_sense_reporting(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_3] & (1 << 6);
-}
-
-static inline bool ata_id_sense_reporting_enabled(const u16 *id)
-{
- if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
- return false;
- return id[ATA_ID_COMMAND_SET_4] & (1 << 6);
-}
-
/**
* ata_id_major_version - get ATA level of drive
* @id: Identify data



\
 
 \ /
  Last update: 2015-09-12 01:01    [W:0.190 / U:2.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site