lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] spi: spi-pxa2xx: Check status register to determine if SSSR_TINT is disabled
On 09/01/2015 05:22 AM, Tan Jui Nee wrote:
> From: "Tan, Jui Nee" <jui.nee.tan@intel.com>
>
> On Intel Baytrail, there is case when interrupt handler get called, no SPI
> message is captured. The RX FIFO is indeed empty when RX timeout pending
> interrupt (SSSR_TINT) happens.
>
> Use the BIOS version where both HSUART and SPI are on the same IRQ. Both
> drivers are using IRQF_SHARED when calling the request_irq function. When
> running two separate and independent SPI and HSUART application that
> generate data traffic on both components, user will see messages like
> below on the console:
>
> pxa2xx-spi pxa2xx-spi.0: bad message state in interrupt handler
>
> This commit will fix this by first checking Receiver Time-out Interrupt,
> if it is disabled, ignore the request and return without servicing.
>
> Signed-off-by: Tan, Jui Nee <jui.nee.tan@intel.com>
> ---
> drivers/spi/spi-pxa2xx.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>


\
 
 \ /
  Last update: 2015-09-01 10:01    [W:0.281 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site