lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] MIPS: ath79: Add USB support on the TL-WR1043ND
Date
Hi,

this serie add a driver for the USB phy on the ATH79 SoCs and enable the
USB port on the TL-WR1043ND. The phy controller is really trivial as it
only use reset lines.

Alban

Alban Bedel (4):
devicetree: Add bindings for the ATH79 USB phy
phy: Add a driver for the ATH79 USB phy
MIPS: ath79: Add the EHCI controller and USB phy to the AR9132 dtsi
MIPS: ath79: Enable the USB port on the TL-WR1043ND

.../devicetree/bindings/phy/phy-ath79-usb.txt | 18 ++++
arch/mips/boot/dts/qca/ar9132.dtsi | 24 +++++
arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 4 +
drivers/phy/Kconfig | 8 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-ath79-usb.c | 115 +++++++++++++++++++++
6 files changed, 170 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-ath79-usb.txt
create mode 100644 drivers/phy/phy-ath79-usb.c

--
2.0.0



\
 
 \ /
  Last update: 2015-09-01 17:41    [W:0.085 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site