lkml.org 
[lkml]   [2015]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 06/16] Documentation: drm/bridge: add document for analogix_dp
Date
Analogix dp driver is split from exynos dp driver, so we just
make an copy of exynos_dp.txt, and then simplify exynos_dp.txt

Beside update some exynos dtsi file with the latest change
according to the devicetree binding documents.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v4:
- Take Krzysztof suggest, split all DTS changes, and provide backward compatibility.
Mark old properties as deprecated but still support them.
- Take Rob suggest, update "analogix,hpd-gpio" to "hpd-gpios" prop name.
- Take Thierry suggest, deprecated some properties which could parsed from Edid/Mode/DPCD.
"analogix,color-space" & "analogix,color-depth" &
"analogix,link-rate" & "analogix,lane-count" &
"analogix,ycbcr-coeff" & "analogix,dynamic-range" &
"vsync-active-high" & "hsync-active-high" & "interlaces"

Changes in v3:
- Take Heiko suggest, add devicetree binding documents.
- Take Thierry Reding suggest, remove sync pol & colorimetry properies
from the new analogix dp driver devicetree binding.
- Update the exist exynos dtsi file with the latest DP DT properies.

Changes in v2: None

.../devicetree/bindings/drm/bridge/analogix_dp.txt | 50 +++++++++++++++++
.../devicetree/bindings/video/exynos_dp.txt | 63 ++++++++--------------
2 files changed, 71 insertions(+), 42 deletions(-)
create mode 100644 Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
new file mode 100644
index 0000000..f54dc3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
@@ -0,0 +1,50 @@
+Analogix Display Port bridge bindings
+
+Required properties for dp-controller:
+ -compatible:
+ platform specific such as:
+ * "samsung,exynos5-dp"
+ * "rockchip,rk3288-dp"
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -interrupt-parent:
+ phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -hpd-gpios:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+ -port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/video/exynos_dp.txt
+ * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+-------------------------------------------------------------------------------
+
+Example:
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x10000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ clocks = <&clock 342>;
+ clock-names = "dp";
+
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 7a3a9cd..ea03b3a 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -31,45 +31,31 @@ Required properties for dp-controller:
from general PHY binding: the phandle for the PHY device.
-phy-names:
from general PHY binding: Should be "dp".
- -samsung,color-space:
- input video data format.
- COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
- -samsung,dynamic-range:
- dynamic range for input video data.
- VESA = 0, CEA = 1
- -samsung,ycbcr-coeff:
- YCbCr co-efficients for input video.
- COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
- -samsung,color-depth:
- number of bits per colour component.
- COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
- -samsung,link-rate:
- link rate supported by the panel.
- LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
- -samsung,lane-count:
- number of lanes supported by the panel.
- LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+
+Optional properties for dp-controller:
- display-timings: timings for the connected panel as described by
Documentation/devicetree/bindings/video/display-timing.txt

-Optional properties for dp-controller:
- -interlaced:
- interlace scan mode.
- Progressive if defined, Interlaced if not defined
- -vsync-active-high:
- VSYNC polarity configuration.
- High if defined, Low if not defined
- -hsync-active-high:
- HSYNC polarity configuration.
- High if defined, Low if not defined
- -samsung,hpd-gpio:
- Hotplug detect GPIO.
- Indicates which GPIO should be used for hotplug
- detection
- -video interfaces: Device node can contain video interface port
- nodes according to [1].
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ -phys (required)
+ -phy-names (required)
+ -hpd-gpios (optional)
+ -video interfaces (optional)

-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+Deprecated properties for DisplayPort:
+-interlaced: deprecated prop that can parsed frm drm_display_mode.
+-vsync-active-high: deprecated prop that can parsed frm drm_display_mode.
+-hsync-active-high: deprecated prop that can parsed frm drm_display_mode.
+-samsung,ycbcr-coeff: deprecated prop that can parsed frm drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed frm drm_display_mode.
+-samsung,color-space: deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth: deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method.
+-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method.
+-samsung,hpd-gpio: deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------

Example:

@@ -88,13 +74,6 @@ SOC specific portion:

Board Specific portion:
dp-controller {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
display-timings {
native-mode = <&lcd_timing>;
lcd_timing: 1366x768 {
--
2.1.2



\
 
 \ /
  Last update: 2015-09-01 08:21    [W:1.587 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site