lkml.org 
[lkml]   [2015]   [Aug]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/12] drm: bridge/dw_hdmi: rename dw_hdmi_phy_enable_power()
Date
dw_hdmi_phy_enable_power() is not about enabling and disabling power.
It is about allowing or preventing power-down mode being entered - the
register is documented as "Power-down enable (active low 0b)."

This can be seen as the bit has no effect when the HDMI phy is
operational on iMX6 hardware.

Rename the function to dw_hdmi_phy_enable_powerdown() to reflect the
documentation, make it take a bool for the 'enable' argument, and invert
the value to be written.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/gpu/drm/bridge/dw_hdmi.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index fbac8386552b..7b8a4e942a71 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -737,9 +737,9 @@ static int hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
return 0;
}

-static void dw_hdmi_phy_enable_power(struct dw_hdmi *hdmi, u8 enable)
+static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
{
- hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
+ hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_PDZ_OFFSET,
HDMI_PHY_CONF0_PDZ_MASK);
}
@@ -879,7 +879,7 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi, unsigned char prep,
/* REMOVE CLK TERM */
hdmi_phy_i2c_write(hdmi, 0x8000, 0x05); /* CKCALCTRL */

- dw_hdmi_phy_enable_power(hdmi, 1);
+ dw_hdmi_phy_enable_powerdown(hdmi, false);

/* toggle TMDS enable */
dw_hdmi_phy_enable_tmds(hdmi, 0);
@@ -924,7 +924,7 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi)
dw_hdmi_phy_sel_data_en_pol(hdmi, 1);
dw_hdmi_phy_sel_interface_control(hdmi, 0);
dw_hdmi_phy_enable_tmds(hdmi, 0);
- dw_hdmi_phy_enable_power(hdmi, 0);
+ dw_hdmi_phy_enable_powerdown(hdmi, true);

/* Enable CSC */
ret = hdmi_phy_configure(hdmi, 0, 8, cscon);
@@ -1155,7 +1155,7 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi)
return;

dw_hdmi_phy_enable_tmds(hdmi, 0);
- dw_hdmi_phy_enable_power(hdmi, 0);
+ dw_hdmi_phy_enable_powerdown(hdmi, true);

hdmi->phy_enabled = false;
}
--
2.1.0


\
 
 \ /
  Last update: 2015-08-08 18:21    [W:0.783 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site