lkml.org 
[lkml]   [2015]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] sb_edac: fix TAD presence check for sbridge_mci_bind_devs()
Date
In 7d375bff, NUM_CHANNELS was changed to 8 and the channel space was
renumerated to handle EN, EP, and EX configurations.

The *_mci_bind_devs functions, except for sbridge_mci_bind_devs(), got a
new device presence check in the form of saw_chan_mask. However,
sbridge_mci_bind_devs() still uses the NUM_CHANNELS for loop.

With the increase in NUM_CHANNELS, this loop fails at index 4 since
SB only has 4 TADs. This results in the following error on SB machines:

EDAC sbridge: Some needed devices are missing
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Couldn't find mci handle

This patch adapts the saw_chan_mask logic for sbridge_mci_bind_devs() as
well.

After this patch:

EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:3f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:7f:0e.0 (POLLED)

Signed-off-by: Seth Jennings <sjenning@redhat.com>
---
drivers/edac/sb_edac.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index ca78311..91cf710 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -1648,6 +1648,7 @@ static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
{
struct sbridge_pvt *pvt = mci->pvt_info;
struct pci_dev *pdev;
+ u8 saw_chan_mask = 0;
int i;

for (i = 0; i < sbridge_dev->n_devs; i++) {
@@ -1681,6 +1682,7 @@ static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
{
int id = pdev->device - PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0;
pvt->pci_tad[id] = pdev;
+ saw_chan_mask |= 1 << id;
}
break;
case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO:
@@ -1701,10 +1703,8 @@ static int sbridge_mci_bind_devs(struct mem_ctl_info *mci,
!pvt-> pci_tad || !pvt->pci_ras || !pvt->pci_ta)
goto enodev;

- for (i = 0; i < NUM_CHANNELS; i++) {
- if (!pvt->pci_tad[i])
- goto enodev;
- }
+ if (saw_chan_mask != 0x0f)
+ goto enodev;
return 0;

enodev:
--
2.4.3


\
 
 \ /
  Last update: 2015-08-05 20:41    [W:0.082 / U:4.968 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site