lkml.org 
[lkml]   [2015]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] media: atmel-isi: move configure_geometry() to start_streaming()
Yep, I see the thread and updates to this patch now, please, ignore this 
mail, sorry.

Thanks
Guennadi

On Sun, 30 Aug 2015, Guennadi Liakhovetski wrote:

> Hi Josh,
>
> On Wed, 17 Jun 2015, Josh Wu wrote:
>
> > As in set_fmt() function we only need to know which format is been set,
> > we don't need to access the ISI hardware in this moment.
> >
> > So move the configure_geometry(), which access the ISI hardware, to
> > start_streaming() will make code more consistent and simpler.
> >
> > Signed-off-by: Josh Wu <josh.wu@atmel.com>
> > ---
> >
> > drivers/media/platform/soc_camera/atmel-isi.c | 17 +++++------------
> > 1 file changed, 5 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
> > index 8bc40ca..b01086d 100644
> > --- a/drivers/media/platform/soc_camera/atmel-isi.c
> > +++ b/drivers/media/platform/soc_camera/atmel-isi.c
> > @@ -390,6 +390,11 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
> > /* Disable all interrupts */
> > isi_writel(isi, ISI_INTDIS, (u32)~0UL);
> >
> > + ret = configure_geometry(isi, icd->user_width, icd->user_height,
> > + icd->current_fmt->code);
> > + if (ret < 0)
> > + return ret;
>
> No. Firstly, you'd have to pm_runtime_put() here if you fail. Secondly I
> think it's better to fail earlier - at S_FMT, than here. Not accessing the
> hardware in S_FMT is a good idea, but I'd at least do all the checking
> there. So, maybe add a "u32 cfg2_cr" field to struct atmel_isi, calculate
> it in S_FMT but only write to the hardware in start_streaming()?
>
> Thanks
> Guennadi
>
> > +
> > spin_lock_irq(&isi->lock);
> > /* Clear any pending interrupt */
> > isi_readl(isi, ISI_STATUS);
> > @@ -477,8 +482,6 @@ static int isi_camera_init_videobuf(struct vb2_queue *q,
> > static int isi_camera_set_fmt(struct soc_camera_device *icd,
> > struct v4l2_format *f)
> > {
> > - struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
> > - struct atmel_isi *isi = ici->priv;
> > struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
> > const struct soc_camera_format_xlate *xlate;
> > struct v4l2_pix_format *pix = &f->fmt.pix;
> > @@ -511,16 +514,6 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd,
> > if (mf->code != xlate->code)
> > return -EINVAL;
> >
> > - /* Enable PM and peripheral clock before operate isi registers */
> > - pm_runtime_get_sync(ici->v4l2_dev.dev);
> > -
> > - ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
> > -
> > - pm_runtime_put(ici->v4l2_dev.dev);
> > -
> > - if (ret < 0)
> > - return ret;
> > -
> > pix->width = mf->width;
> > pix->height = mf->height;
> > pix->field = mf->field;
> > --
> > 1.9.1
> >
>


\
 
 \ /
  Last update: 2015-08-30 12:41    [W:0.073 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site