lkml.org 
[lkml]   [2015]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/4] GPIO support for BRCMSTB
On 31/07/15 18:17, Gregory Fong wrote:
> Adds interrupt support for the GPIO controller (UPG GIO) used on Broadcom's
> various BRCMSTB SoCs (BCM7XXX and others). For all existing hardware, this
> block hooks up to the BCM7120 L2 IRQ controller and so will require
> CONFIG_BCM7120_L2_IRQ=y.

For this entire series:

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

Thanks!

>
> New in v4:
> - add nodes for the BRCMSTB GPIO controller to the BCM7445 dts file
> - a few improvements suggested by Linus Walleij on v3
> - remove unused 'irq' argument to brcmstb_gpio_irq_bank_handler()
>
> The following are not included in this patchset:
> - Initial device tree bindings (merged from v1 to GPIO tree)
> - Initial GPIO support w/o interrupts (merged from v2 to GPIO tree)
> - ARM Kconfig changes (merged from v2 to arm-soc tree)
> - fix for null ptr deref in driver remove (merged from v3)
>
> Previous versions:
> v1: https://lkml.org/lkml/2015/5/6/199
> v2: https://lkml.org/lkml/2015/5/28/853
> v3: https://lkml.org/lkml/2015/6/17/960
>
> Gregory Fong (4):
> dt-bindings: brcmstb-gpio: document properties for wakeup
> gpio: brcmstb: Add interrupt and wakeup source support
> gpio: brcmstb: support wakeup from S5 cold boot
> ARM: dts: brcmstb: add BCM7445 GPIO nodes
>
> .../devicetree/bindings/gpio/brcm,brcmstb-gpio.txt | 35 ++-
> arch/arm/boot/dts/bcm7445.dtsi | 50 ++++
> drivers/gpio/Kconfig | 1 +
> drivers/gpio/gpio-brcmstb.c | 306 ++++++++++++++++++++-
> 4 files changed, 379 insertions(+), 13 deletions(-)
>


--
Florian


\
 
 \ /
  Last update: 2015-08-03 19:41    [W:0.094 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site