lkml.org 
[lkml]   [2015]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 14/16] mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage
Date
vdd voltage is set in mmc core to ios->vdd and vmmc should actually
be set to this voltage. Modify omap_hsmmc_enable_supply
to not take vdd as argument since now it's directly set to
the voltage in ios->vdd.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/mmc/host/omap_hsmmc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index e04060b..9a28719 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -247,13 +247,14 @@ static int omap_hsmmc_get_cover_state(struct device *dev)

#ifdef CONFIG_REGULATOR

-static int omap_hsmmc_enable_supply(struct mmc_host *mmc, int vdd)
+static int omap_hsmmc_enable_supply(struct mmc_host *mmc)
{
int ret;
struct omap_hsmmc_host *host = mmc_priv(mmc);
+ struct mmc_ios *ios = &mmc->ios;

if (mmc->supply.vmmc) {
- ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
if (ret)
return ret;
}
@@ -385,7 +386,7 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- ret = omap_hsmmc_enable_supply(mmc, vdd);
+ ret = omap_hsmmc_enable_supply(mmc);
if (ret)
return ret;

--
1.7.9.5


\
 
 \ /
  Last update: 2015-08-03 14:41    [W:0.107 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site