Messages in this thread | | | Subject | Re: [PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers | From | Alex Smith <> | Date | Wed, 26 Aug 2015 15:21:22 +0100 |
| |
On 18/08/2015 13:39, Alex Smith wrote: > On 27/07/2015 14:50, Alex Smith wrote: >> Hi, >> >> This series adds support for the BCH controller and NAND devices on >> the Ingenic JZ4780 SoC. >> >> Tested on the MIPS Creator Ci20 board. All dependencies are now in >> mainline so it should be possible to compile test now. >> >> This version of the series has been rebased on 4.2-rc4, and also adds >> an additional patch to fix an issue that was encountered in the >> external Ci20 3.18 kernel branch. >> >> Review and feedback welcome. >> >> Thanks, >> Alex >> >> Alex Smith (3): >> mtd: nand: increase ready wait timeout and report timeouts >> dt-bindings: binding for jz4780-{nand,bch} >> mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs >> >> .../bindings/mtd/ingenic,jz4780-nand.txt | 57 ++++ >> drivers/mtd/nand/Kconfig | 7 + >> drivers/mtd/nand/Makefile | 1 + >> drivers/mtd/nand/jz4780_bch.c | 354 +++++++++++++++++++ >> drivers/mtd/nand/jz4780_bch.h | 42 +++ >> drivers/mtd/nand/jz4780_nand.c | 376 +++++++++++++++++++++ >> drivers/mtd/nand/nand_base.c | 15 +- >> 7 files changed, 849 insertions(+), 3 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt >> create mode 100644 drivers/mtd/nand/jz4780_bch.c >> create mode 100644 drivers/mtd/nand/jz4780_bch.h >> create mode 100644 drivers/mtd/nand/jz4780_nand.c > > Hi, > > Would it be possible for these to go in for 4.3? > > Thanks, > Alex
Ping again.
| |