lkml.org 
[lkml]   [2015]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 05/11] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node.
Hi Mauro,

On Mon, 17 Aug 2015, Mauro Carvalho Chehab wrote:

> Em Thu, 30 Jul 2015 18:08:55 +0100
> Peter Griffin <peter.griffin@linaro.org> escreveu:
>
> > This patch adds in the required DT node for the c8sectpfe
> > Linux DVB demux driver which allows the tsin channels
> > to be used on an upstream kernel.
> >
> > Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> > ---
> > arch/arm/boot/dts/stihxxx-b2120.dtsi | 38 ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 38 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> > index 62994ae..1bc018e 100644
> > --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> > +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> > @@ -6,6 +6,10 @@
> > * it under the terms of the GNU General Public License version 2 as
> > * published by the Free Software Foundation.
> > */
> > +
> > +#include <dt-bindings/clock/stih407-clks.h>
> > +#include <dt-bindings/media/c8sectpfe.h>
> > +
> > / {
> > soc {
> > sbc_serial0: serial@9530000 {
> > @@ -85,5 +89,39 @@
> > status = "okay";
> > };
> >
> > + c8sectpfe@08a20000 {
> > + compatible = "st,stih407-c8sectpfe";
> > + status = "okay";
> > + reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
> > + reg-names = "c8sectpfe", "c8sectpfe-ram";
> > +
> > + interrupts = <0 34 0>, <0 35 0>;
> > + interrupt-names = "c8sectpfe-error-irq",
> > + "c8sectpfe-idle-irq";
> > +
> > + pinctrl-names = "tsin0-serial", "tsin0-parallel",
> > + "tsin3-serial", "tsin4-serial",
> > + "tsin5-serial";
> > +
> > + pinctrl-0 = <&pinctrl_tsin0_serial>;
> > + pinctrl-1 = <&pinctrl_tsin0_parallel>;
> > + pinctrl-2 = <&pinctrl_tsin3_serial>;
> > + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
> > + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
> > +
> > + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
> > + clock-names = "c8sectpfe";
> > +
> > + /* tsin0 is TSA on NIMA */
> > + tsin0: port@0 {
> > +
> > + tsin-num = <0>;
> > + serial-not-parallel;
> > + i2c-bus = <&ssc2>;
>
> There's no ssc2 defined at the device tree.

Whoops, I missed one patch off from the series in v2.
>
> I'll revert this patch and mark the driver as broken until this gets
> fixed.

I just sent you another series here https://lkml.org/lkml/2015/8/25/499
which includes this patch, and also the patch which adds ssc2/3, along
with a fix to the Kconfig file spotted by Valentin Rothberg.

regards,

Peter.


\
 
 \ /
  Last update: 2015-08-25 19:21    [W:0.139 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site