lkml.org 
[lkml]   [2015]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/4] mfd: Add DT binding for Maxim MAX77802 IC
On Thu, 30 Jul 2015, Javier Martinez Canillas wrote:

> The MAX77802 is a chip that contains regulators, 2 32kHz clocks,
> a RTC and an I2C interface to program the individual components.
>
> The are already DT bindings for the regulators and clocks and
> these reference to a bindings/mfd/max77802.txt file, that didn't
> exist, for the details about the PMIC.
>
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
>
> Changes in v3:
> - Add Krzysztof Kozlowski Reviewed-by tag to patch #3.
> - Capitalise all acronyms. Suggested by Lee Jones.
> - Use relative path to refer other bindings. Suggested by Lee Jones.
> - Use IRQ_TYPE_NONE instead of 0 in example. Suggested by Lee Jones.
>
> Changes in v2:
> - Use the correct "maxim,max77802" compatible string.
> Suggested by Krzysztof Kozlowski
> - Use a pmic generic node name for the max77802 node example.
> Suggested by Sergei Shtylyov.
>
> Documentation/devicetree/bindings/mfd/max77802.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
> new file mode 100644
> index 000000000000..911ec5fcaefd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/max77802.txt
> @@ -0,0 +1,26 @@
> +Maxim MAX77802 multi-function device
> +
> +The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
> +efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
> +up application processors and peripherals, a 2-channel 32kHz clock outputs,
> +a Real-Time-Clock (RTC) and a I2C interface to program the individual
> +regulators, clocks outputs and the RTC.
> +
> +Binding for the built-in 32k clock generator block is defined separately
> +in the ../clk/maxim,max77802.txt file and binding for the regulators
> +is defined in the ../regulator/max77802.txt file.

"Bindings for the built-in 32k clock generator block and
regulators are defined in ../clk/maxim,max77802.txt and
../regulator/max77802.txt respectively."

> +Required properties:
> +- compatible : Must be "maxim,max77802";

';' ?

> +- reg : Specifies the I2C slave address of PMIC block.
> +- interrupts : This I2C device has an IRQ line connected to the main SoC.
> +- interrupt-parent : The parent interrupt controller.

I always find this easier on the eye when you:

Required properties:
- compatible : Must be "maxim,max77802"
- reg : Specifies the I2C slave address of PMIC block.
- interrupts : This I2C device has an IRQ line connected to the main SoC.
- interrupt-parent : The parent interrupt controller.

> +Example:
> +
> + max77802: pmic@09 {
> + compatible = "maxim,max77802";
> + interrupt-parent = <&intc>;
> + interrupts = <26 IRQ_TYPE_NONE>;
> + reg = <0x09>;
> + };

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-08-11 14:21    [W:0.078 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site