lkml.org 
[lkml]   [2015]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/3] Documentation: dt-bindings: add dt binding info for dwc2 reset control
Date
Signed-off-by: Yunzhi Li <lyz@rock-chips.com>
---

Documentation/devicetree/bindings/usb/dwc2.txt | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index fd132cb..6a84099 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -24,6 +24,12 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
- g-rx-fifo-size: size of rx fifo size in gadget mode.
- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
+- resets: A list of phandle + reset-specifier pairs for the resets listed in
+ reset-names
+- reset-names: Should contain the following:
+ "ahb": AHB interface reset
+ "phy": PHY reset
+ "con": controller reset

Example:

--
2.0.0



\
 
 \ /
  Last update: 2015-08-11 10:21    [W:0.069 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site