lkml.org 
[lkml]   [2015]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [5/6] mvneta: implement SGMII-based in-band link state signaling
Hi Stas,

On Fri, 27 Mar 2015, Stas Sergeev wrote:

> When MDIO bus is unavailable (common setup for SGMII), the in-band
> signaling must be used to correctly track link state.
> This patch enables the in-band status delivery and interrupts for
> links state changes, namely:
> - link up/down
> - link speed
> - duplex full/half
> Upon reciving the appropriate interrupt, the driver updates the
> fixed_phy status to match the received status.

I'm seeing a regression with this patch when trying to netboot an Armada
XP board (by reverting this commit it is fine), the network
link stays down:

[ 9.274492] mvneta d0070000.ethernet eth0: Link is Down

(I've added an extra call to phy_print_status() in mvneta_adjust_link() to
get this trace).

I've tried to dig a bit in the code, and it seems that the status.link flag
never gets set in mvneta_fixed_link_update(). If I try to force the
use_inband_status to 0 in mvneta_probe(), it boots properly so I'm not
sure that I need the in-band status/delivery in my case ; I'm using a
custom DTB with a fixed-link:

eth0: ethernet@70000 {
status = "okay";
fixed-link = <1 1 1000 0 0>;
phy-mode = "sgmii";
};

Could there be something missing in the condition that initializes
pp->use_inband_status?

PS: I've also tried to apply this patch without success:
https://lkml.org/lkml/2015/6/18/496

--
Sébastien
\
 
 \ /
  Last update: 2015-07-08 19:01    [W:0.147 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site