lkml.org 
[lkml]   [2015]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: mt8173: add clock_null
On Tue, Jul 7, 2015 at 10:36 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Tue, Jul 07, 2015 at 10:15:29PM +0800, Daniel Kurtz wrote:
>> On Tue, Jul 7, 2015 at 9:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
>> > On Thu, Jun 18, 2015 at 01:29:11PM +0800, Eddie Huang wrote:
>> >> Add clk_null, which represents clocks that can not / need not
>> >> controlled by software.
>> >> There are many clocks' parent set to clk_null.
>> >>
>> >> Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
>> >> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
>> >> ---
>> >> Base on 4.1-rc1
>> >>
>> >> Change-Id: I4db9b40d07e28f54f7bae9b676316cbd6a962124
>> >> ---
>> >> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++++
>> >> 1 file changed, 6 insertions(+)
>> >>
>> >> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> >> index 924fdb6..4798f44 100644
>> >> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> >> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
>> >> @@ -81,6 +81,12 @@
>> >> cpu_on = <0x84000003>;
>> >> };
>> >>
>> >> + clk_null: clk_null {
>> >> + compatible = "fixed-clock";
>> >> + clock-frequency = <0>;
>> >> + #clock-cells = <0>;
>> >> + };
>> >
>> > The discussion around this patch shows that we don't want to have this
>> > clock in the device tree as it is not a hardware description.
>> >
>> > Ok, fine. Eddie, you told us that the rate of the current clk_null children
>> > is not interesting. What's the motivation to send this patch anyway
>> > then? Why can't you keep its children on the orphan list where they are
>> > already now?
>> >
>> > Another possibility would be to instantiate the clk_null clock from C
>> > code rather than from the device tree. This way we wouldn't put any
>> > wrong descriptions into the device tree and still can implement the
>> > support for the real parent clocks when we actually need them.
>>
>> Some device nodes, like mmc, use a clk_null phandle as one of their clocks:
>>
>> mmc1: mmc@11240000 {
>> compatible = "mediatek,mt8173-mmc",
>> "mediatek,mt8135-mmc";
>> reg = <0 0x11240000 0 0x1000>;
>> interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
>> clocks = <&pericfg CLK_PERI_MSDC30_1>,
>> <&clk_null>;
>> clock-names = "source", "hclk";
>> status = "disabled";
>> };
>
> This is another case than the one we discussed about. In the case above
> I motivated using a dummy clock since the clock exists in the system,
> but is not software controllable. To abstract this from the driver
> (which needs this clock since it exists) we here have the dummy clock.
> However, of course I can't prove the clock is indeed not software
> controllable; that's only the information I have.

I was trying to answer your question "What's the motivation to send
this patch anyway?".
The motivation is to send follow on patches that use the clk_null
phandle. We need to provide some clock as the mmc1's hclk. I do not
understand why this has to be "clk_null", though. It seems like this
should be a real clock coming from one of the real clock_controller
nodes. After all, the mmc driver is going to be enabling/disabling
this clock for power savings at runtime. What does that even mean for
clk_null ?

Sorry, I'm not exactly sure what you are saying in your last reply.

>
> Sascha
>
> --
> Pengutronix e.K. | |
> Industrial Linux Solutions | http://www.pengutronix.de/ |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


\
 
 \ /
  Last update: 2015-07-07 17:41    [W:0.324 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site