lkml.org 
[lkml]   [2015]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.1 095/267] usb: dwc3: gadget: dont clear EP_BUSY too early
Date
4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

commit e18b7975c885bc3a938b9a76daf32957ea0235fa upstream.

In case of non-Isochronous transfers, we don't
want to clear DWC3_EP_BUSY flag until XferComplete
event. That's because XferInProgress was only enabled
so we can recycle TRBs and usb_requests quicker, but
there are still other pending requests being transferred.

In order to make sure we don't allow for another StartTransfer
command while the HW is still processing other transfers,
we must keep DWC3_EP_BUSY flag set and this what this patch
does.

Fixes: f3af36511e60 (usb: dwc3: gadget: always enable IOC on
bulk/interrupt transfers)
Reported-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Tested-by: sundeep subbaraya <sundeep.lkml@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/dwc3/gadget.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1906,12 +1906,16 @@ static void dwc3_endpoint_transfer_compl
{
unsigned status = 0;
int clean_busy;
+ u32 is_xfer_complete;
+
+ is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);

if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;

clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy)
+ if (clean_busy && (is_xfer_complete ||
+ usb_endpoint_xfer_isoc(dep->endpoint.desc)))
dep->flags &= ~DWC3_EP_BUSY;

/*



\
 
 \ /
  Last update: 2015-07-31 22:21    [W:0.993 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site