lkml.org 
[lkml]   [2015]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] thermal/cpu_cooling: rename cpufreq_val as clipped_freq
Date
That's what it is for, lets name it properly.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/thermal/cpu_cooling.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index bf2673bb3cf5..61ee726ede34 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -68,7 +68,7 @@ struct power_table {
* registered cooling device.
* @cpufreq_state: integer value representing the current state of cpufreq
* cooling devices.
- * @cpufreq_val: integer value representing the absolute value of the clipped
+ * @clipped_freq: integer value representing the absolute value of the clipped
* frequency.
* @max_level: maximum cooling level. One less than total number of valid
* cpufreq frequencies.
@@ -91,7 +91,7 @@ struct cpufreq_cooling_device {
int id;
struct thermal_cooling_device *cool_dev;
unsigned int cpufreq_state;
- unsigned int cpufreq_val;
+ unsigned int clipped_freq;
unsigned int max_level;
unsigned int *freq_table; /* In descending order */
struct cpumask allowed_cpus;
@@ -226,7 +226,7 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
if (!cpumask_test_cpu(policy->cpu, &cpufreq_dev->allowed_cpus))
continue;

- max_freq = cpufreq_dev->cpufreq_val;
+ max_freq = cpufreq_dev->clipped_freq;

if (policy->max != max_freq)
cpufreq_verify_within_limits(policy, 0, max_freq);
@@ -514,7 +514,7 @@ static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,

clip_freq = cpufreq_device->freq_table[state];
cpufreq_device->cpufreq_state = state;
- cpufreq_device->cpufreq_val = clip_freq;
+ cpufreq_device->clipped_freq = clip_freq;

cpufreq_update_policy(cpu);

@@ -856,7 +856,7 @@ __cpufreq_cooling_register(struct device_node *np,
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}

- cpufreq_dev->cpufreq_val = cpufreq_dev->freq_table[0];
+ cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;

mutex_lock(&cooling_cpufreq_lock);
--
2.4.0


\
 
 \ /
  Last update: 2015-07-30 18:21    [W:0.087 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site