lkml.org 
[lkml]   [2015]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC][PATCH] x86: Allow early_printk to use console style param like 115200n8
When I enable early_printk on a kernel, I cut and paste the console=
input and add to earlyprintk parameter. But I notice recently that
ktest has not been detecting triple faults. The way it detects it, is
by seeing the kernel banner "Linux version .." with a different kernel
version pop up. Then I noticed that early printk was no longer working
on my console, which was why ktest was not seeing it.

I bisected it down and it was added to 4.0 with this commit:

commit ea9e9d802902 ("Specify PCI based UART for earlyprintk")

because it converted the simple_strtoul() that converts the baud number
into a kstrtoul(). The problem with this is, I had as my baud rate,
115200n8 (acceptable for console=ttyS0), but because of the "n8", the
kstrtoul() doesn't parse the baud rate and returns an error, which sets
the baud rate to the default 9600. This explains the garbage on my
screen.

Now, earlyprintk= kernel parameter does not say it accepts that format.
Thus, one answer would simply be me changing my kernel parameters to
remove the "n8" since it isn't parsed anyway. But I wonder if other
people run into this, and it seems strange that the two consoles for
serial accepts different input.

I could also extend this to have earlyprintk do something with that
"n8" or whatever it has and have it match the console parsing (which,
BTW, still uses simple_strtoul(), as I guess it has to).

This patch just makes my old kernel parameter parsing work like it use
to. Although, if someone were to use a hex number starting with "0x",
this patch would break it. That could be fixed too (hence the RFC).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index a62536a1be88..83d375148565 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -17,6 +17,7 @@
#include <asm/intel-mid.h>
#include <asm/pgtable.h>
#include <linux/usb/ehci_def.h>
+#include <linux/ctype.h>
#include <linux/efi.h>
#include <asm/efi.h>
#include <asm/pci_x86.h>
@@ -189,6 +190,15 @@ static __init void early_serial_init(char *s)
}

if (*s) {
+ char *p;
+ /*
+ * In case the input is like console with text after the baud
+ * rate. e.g. 115200n8. kstrtoul() will error on such input.
+ */
+ for (p = s; *p && isdigit(*p); p++)
+ ;
+ *p = 0;
+
if (kstrtoul(s, 0, &baud) < 0 || baud == 0)
baud = DEFAULT_BAUD;
}

\
 
 \ /
  Last update: 2015-07-04 00:21    [W:0.086 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site