lkml.org 
[lkml]   [2015]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/5] drm/rockchip: vop: support plane scale
On Fri, Jul 3, 2015 at 7:22 PM, Mark yao <mark.yao@rock-chips.com> wrote:
> On 2015年07月03日 17:58, Tomasz Figa wrote:
>>>>
>>>> >>Aren't the scl_modes for CbCr planes always the same as for Y plane?
>>>
>>> >
>>> >
>>> >No, such as src(1920 x 1080) -> dst(1280x800), yuv format is NV12.
>>> >so Y plane horizontal and vertical is scale down.
>>> >
>>> >but src_w = 1920 / 2 = 960 < 1280
>>> > src_h = 1080 / 2 = 540 < 800.
>>> >
>>> >So Cbcr horizontal and vertical is scale up.
>>
>> Sorry, I don't follow.
>>
>> If we scale down Y plane in NV12 from 1920x1080 to 1280x800, then
>> original CbCr plane will be 960x540 and destination CbCr plane will be
>> 640x400 (because CbCr plane of NV12 is subsampled 2x2, which is half
>> the width and half the height of Y plane), so both planes are being
>> scaled down.
>>
> destination CbCr plane is 1280x800, destination can't be subsample.

Ah, I see, so internally it's always scalling to destination plane
size. This means that calculation for both Y and CbCr must be done
indeed, but even then you could use helper functions for that, since
they differ only in parameters.

Best regards,
Tomasz


\
 
 \ /
  Last update: 2015-07-03 17:01    [W:0.277 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site