lkml.org 
[lkml]   [2015]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/8] iio: accel: bmc150: use available_scan_masks
Date
Use available_scan_masks to allow the iio core to select
the data to send to userspace depending on which axes are
enabled, instead of doing this in the driver's interrupt
handler.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
---
drivers/iio/accel/bmc150-accel.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index 73e8773..c6c8416 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -136,6 +136,7 @@ enum bmc150_accel_axis {
AXIS_X,
AXIS_Y,
AXIS_Z,
+ AXIS_MAX,
};

enum bmc150_power_modes {
@@ -1201,6 +1202,8 @@ static const struct iio_info bmc150_accel_info_fifo = {
.driver_module = THIS_MODULE,
};

+static const unsigned long bmc150_accel_scan_masks[] = {0x7, 0};
+
static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
@@ -1209,8 +1212,7 @@ static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p)
int bit, ret, i = 0;

mutex_lock(&data->mutex);
- for_each_set_bit(bit, indio_dev->active_scan_mask,
- indio_dev->masklength) {
+ for (bit = 0; bit < AXIS_MAX; bit++) {
ret = i2c_smbus_read_word_data(data->client,
BMC150_ACCEL_AXIS_TO_REG(bit));
if (ret < 0) {
@@ -1632,6 +1634,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
indio_dev->dev.parent = &client->dev;
indio_dev->channels = data->chip_info->channels;
indio_dev->num_channels = data->chip_info->num_channels;
+ indio_dev->available_scan_masks = bmc150_accel_scan_masks;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmc150_accel_info;
--
1.9.1


\
 
 \ /
  Last update: 2015-07-03 12:01    [W:0.454 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site