lkml.org 
[lkml]   [2015]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] iTCO_wdt: Expose watchdog properties using platform data
On Wed, 29 Jul 2015, Aaron Sierra wrote:

> > From: "Lee Jones" <lee.jones@linaro.org>
> > Sent: Wednesday, July 29, 2015 2:38:41 AM
> >
> > On Tue, 28 Jul 2015, Aaron Sierra wrote:
> >
> > > > > > > @@ -933,7 +956,7 @@ gpe0_done:
> > > > > > > lpc_chipset_info[priv->chipset].use_gpio = ret;
> > > > > > > lpc_ich_enable_gpio_space(dev);
> > > > > > >
> > > > > > > - lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_GPIO]);
> > > > > > > + lpc_ich_finalize_gpio_cell(dev);
> > > > > > > ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > > > > > &lpc_ich_cells[LPC_GPIO], 1, NULL, 0, NULL);
> > > > > > >
> > > > > > > @@ -1007,7 +1030,10 @@ static int lpc_ich_init_wdt(struct pci_dev
> > > > > > > *dev)
> > > > > > > res->end = base_addr + ACPIBASE_PMC_END;
> > > > > > > }
> > > > > > >
> > > > > > > - lpc_ich_finalize_cell(dev, &lpc_ich_cells[LPC_WDT]);
> > > > > > > + ret = lpc_ich_finalize_wdt_cell(dev);
> > > > > > > + if (ret)
> > > > > > > + goto wdt_done;
> > > > > > > +
> > > > > > > ret = mfd_add_devices(&dev->dev, PLATFORM_DEVID_AUTO,
> > > > > > > &lpc_ich_cells[LPC_WDT], 1, NULL, 0, NULL);
> > > > > >
> > > > > > Why do you have an mfd_add_devices() call for each device?
> > > > >
> > > > > Good question. This call has been present since March 2012 when support
> > > > > was first added for iTCO_wdt in commit 887c8ec7219f ("watchdog: Convert
> > > > > iTCO_wdt driver to mfd model").
> > > > >
> > > > > There's no good reason that I can see. Aaron?
> > >
> > > I chose to call mfd_add_devices() in each device init function
> > > because I thought it was the easiest way to avoid registering an
> > > incomplete/invalid MFD cell should an error occur during init.
> > >
> > > That way device registration wouldn't be an all-or-nothing affair.
> > >
> > > Doesn't mfd_add_devices() bail out after the first unsuccessful
> > > mfd to platform device translation?
> >
> > Right, as it should.
> >
> > Under what circumstance would an error occur and you'd wish to carry
> > on registering devices?
>
> Lee,
>
> The two devices that this driver is responsible for are conceptually
> independent; they simply are lumped together in one PCI device. No
> failure while preparing resources for the watchdog device should
> prevent the GPIO device from being registered.

This makes me think that perhaps this isn't an MFD at all then?

Perhaps I should invest some time to looking into that.

> The most common real world circumstance that I experience is when a
> BIOS reserves resources associated with the GPIO device, thus
> preventing the GPIO resources (ICH_RES_GPE0 and/or ICH_RES_GPIO) from
> being fully prepared.
>
> I have not experienced issues with the watchdog device, but a similar
> issue would exist if the RCBA were disabled in a "v2" device.
>
> It seems like a dangerous change to simply attempt to register both
> of these devices with a single call, when one or both of them could
> be incomplete.
>
> Perhaps your real issue with this driver structure is that these
> cells are elements of a single lpc_ich_cells array for no clear
> reason. If each had a dedicated mfd_cell variable, would that be
> more acceptable to you?
>
> -static struct mfd_cell lpc_ich_cells[] = {
> +static struct mfd_cell lpc_ich_wdt_cell = {
> ...
> +static struct mfd_cell lpc_ich_gpio_cell = {
>
> That would eliminate the need for the lpc_cells enum, too.

Yes, that would make more sense. Also consider using mfd_add_device()
instead of mfd_add_devices(), as you are only attempting registration
for a single device.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-07-29 21:11    [W:0.095 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site