lkml.org 
[lkml]   [2015]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/5] Add functions producing system time given a backing counter value
On Wed, 29 Jul 2015, Thomas Gleixner wrote:
> On Mon, 27 Jul 2015, John Stultz wrote:
> > On Mon, Jul 27, 2015 at 8:44 PM, John Stultz <john.stultz@linaro.org> wrote:
> > > On Mon, Jul 27, 2015 at 5:46 PM, Christopher Hall
> > > <christopher.s.hall@intel.com> wrote:
> > >> * counter_to_rawmono64
> > >> * counter_to_mono64
> > >> * counter_to_realtime64
> > >>
> > >> Enables drivers to translate a captured system clock counter to system
> > >> time. This is useful for network and audio devices that capture timestamps
> > >> in terms of both the system clock and device clock.
> > >
> > > Huh. So for counter_to_realtime64 & mono64, this seems to ignore the
> > > fact that the multiplier is constantly adjusted and corrected. So that
> > > calling the function twice with the same counter value may result in
> > > different returned values.
> > >
> > > I've not yet groked the whole patchset, but it seems like there needs
> > > to be some mechanism that ensures the counter value is captured and
> > > used in the same (or at least close) interval that the timekeeper data
> > > is valid for.
> >
> >
> > So reading through. It looks like you only use art_to_realtime(), right?
> >
> > So again, since CLOCK_MONOTONIC and CLOCK_REALTIME are constaly being
> > frequency adjusted, it might be best to construct this delta in the
> > following way.
> >
> >
> > Add counter_to_rawmono64(), which should be able to safely calculate
> > the corresponding CLOCK_MONOTONIC_RAW time from any given cycle value.
> >
> > Use getnstime_raw_and_real() to get a immediate snapshot of current
> > MONOTONIC_RAW and REALTIME clocks.
> >
> > Then calculate the delta between the snapshotted counter raw time, and
> > the current raw time. Then apply that offset to the current realtime.
> >
> > The larger the raw-time delta, the larger the possible realtime error.
> > But I think that will be as good as it gets.
>
> I think that's still not the right approach. The whole purpose of this
> is to get a precise snapshot of
>
> - PTP time from the ETH device
> and
> - current system time
>
> Right now this does
>
> ktime_get_real();
> read_ptp_time();
>
> which is obviously not precise.
>
> The new hardware allows you to latch PTP time and ART time atomically
> in the ETH device and read them out.
>
> ART is the base clock of the TSC where
>
> TSC = K + (ART * n) / d;
>
> So for this to work proper, we need a function which converts ART to
> TSC. This is obviously x86/TSC specific code.
>
> Now on the PTP side we need a callback provided by the device driver
> to get the snapshot of the PTP and the ART.
>
> So the proposed implementation merily calls that callback from the PTP
> ioctl and then tries to do a magic CLOCK_REALTIME conversion of the
> ART value. But that's just wrong as it does not guarantee a proper
> correlation to the core timekeeping.
>
> So what we really need is a function in the timekeeper core which gets
> the PTP/ART timestamps from the device under the timekeeper sequence
> counter and converts to clock realtime and raw monotonic.
>
> That function is then called from the PTP ioctl.
>
> Anything else is just 'lets hope it works and is precise enough'
> voodoo.
>
> Something like the below untested patch should be all we need for PTP
> to be as precise as possible.
>
> I don't know whether we need functionality to convert arbitrary
> timestamps at all, but if we really need them then they are going to
> be pretty simple and explicitely not precise for anything else than
> clock monotonic raw. But that's a different story.
>
> Lets concentrate on PTP first and talk about the other stuff once we
> settled the use case which actually has a precision requirement.

Gah crap. Picked a stale version of the patch.

Thanks,

tglx

----------------------------------------->
Subject: ptp: Get sync timestamps
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 29 Jul 2015 10:52:06 +0200

The ART stuff wants to be splitted out.

Not-Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/kernel/tsc.c | 31 +++++++++++++++++++++
include/linux/clocksource.h | 30 ++++++++++++++++++++
include/linux/timekeeping.h | 4 ++
kernel/time/timekeeping.c | 63 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 128 insertions(+)

Index: linux/arch/x86/kernel/tsc.c
===================================================================
--- linux.orig/arch/x86/kernel/tsc.c
+++ linux/arch/x86/kernel/tsc.c
@@ -1059,6 +1059,27 @@ int unsynchronized_tsc(void)
return 0;
}

+static u32 tsc_numerator;
+static u32 tsc_denominator;
+/*
+ * CHECKME: Do we need the adjust value? It should be 0, but if we run
+ * in a VM this might be a different story.
+ */
+static u64 tsc_adjust;
+
+static u64 art_to_tsc(u64 cycles)
+{
+ u64 tmp, res = tsc_adjust;
+
+ res += (cycles / tsc_denominator) * tsc_numerator;
+ tmp = (cycles % tsc_denominator) * tsc_numerator;
+ res += tmp / tsc_denominator;
+ return res;
+}
+
+struct correlated_cs art_timestamper = {
+ .convert = art_to_tsc,
+};

static void tsc_refine_calibration_work(struct work_struct *work);
static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
@@ -1129,6 +1150,16 @@ static void tsc_refine_calibration_work(
(unsigned long)tsc_khz / 1000,
(unsigned long)tsc_khz % 1000);

+ /*
+ * TODO:
+ *
+ * If the system has ART, initialize the art_to_tsc conversion
+ * and set: art_timestamp.related_cs = &tsc_clocksource.
+ *
+ * Before that point a call to get_correlated_timestamp will
+ * fail the clocksource match check.
+ */
+
out:
clocksource_register_khz(&clocksource_tsc, tsc_khz);
}
Index: linux/include/linux/clocksource.h
===================================================================
--- linux.orig/include/linux/clocksource.h
+++ linux/include/linux/clocksource.h
@@ -258,4 +258,34 @@ void acpi_generic_timer_init(void);
static inline void acpi_generic_timer_init(void) { }
#endif

+/**
+ * struct correlated_cs - Descriptor for a clocksource correlated to another clocksource
+ * @related_cs: Pointer to the related timekeeping clocksource
+ * @convert: Conversion function to convert a timestamp from
+ * the correlated clocksource to cycles of the related
+ * timekeeping clocksource
+ */
+struct correlated_cs {
+ struct clocksource *related_cs;
+ u64 (*convert)(u64 cycles);
+};
+
+struct correlated_ts;
+
+/**
+ * struct correlated_ts - Descriptor for taking a correlated time stamp
+ * @get_ts: Function to read out a synced system and device
+ * timestamp
+ * @system_ts: The raw system clock timestamp
+ * @device_ts: The raw device timestamp
+ * @system_real: @system_ts converted to CLOCK_REALTIME
+ * @system_raw: @system_ts converted to CLOCK_MONOTONIC_RAW
+ */
+struct correlated_ts {
+ int (*get_ts)(struct correlated_ts *ts);
+ u64 system_ts;
+ u64 device_ts;
+ u64 system_real;
+ u64 system_raw;
+};
#endif /* _LINUX_CLOCKSOURCE_H */
Index: linux/include/linux/timekeeping.h
===================================================================
--- linux.orig/include/linux/timekeeping.h
+++ linux/include/linux/timekeeping.h
@@ -258,6 +258,10 @@ extern void timekeeping_inject_sleeptime
*/
extern void getnstime_raw_and_real(struct timespec *ts_raw,
struct timespec *ts_real);
+struct correlated_ts;
+struct correlated_cs;
+extern int get_correlated_timestamp(struct correlated_ts *crt,
+ struct correlated_cs *crs);

/*
* Persistent clock related interfaces
Index: linux/kernel/time/timekeeping.c
===================================================================
--- linux.orig/kernel/time/timekeeping.c
+++ linux/kernel/time/timekeeping.c
@@ -312,6 +312,19 @@ static inline s64 timekeeping_get_ns(str
return nsec + arch_gettimeoffset();
}

+static inline s64 timekeeping_convert_to_ns(struct tk_read_base *tkr,
+ cycle_t cycles)
+{
+ cycle_t delta;
+ s64 nsec;
+
+ /* calculate the delta since the last update_wall_time */
+ delta = clocksource_delta(cycles, tkr->cycle_last, tkr->mask);
+
+ nsec = delta * tkr->mult + tkr->xtime_nsec;
+ return nsec >> tkr->shift;
+}
+
/**
* update_fast_timekeeper - Update the fast and NMI safe monotonic timekeeper.
* @tkr: Timekeeping readout base from which we take the update
@@ -885,6 +898,56 @@ EXPORT_SYMBOL(getnstime_raw_and_real);
#endif /* CONFIG_NTP_PPS */

/**
+ * get_correlated_timestamp - Get a correlated timestamp
+ *
+ * Reads a timestamp from a device and correlates it to system time
+ */
+int get_correlated_timestamp(struct correlated_ts *crt,
+ struct correlated_cs *crs)
+{
+ struct timekeeper *tk = &tk_core.timekeeper;
+ unsigned long seq;
+ cycles_t cycles;
+ ktime_t base;
+ s64 nsecs;
+ int ret;
+
+ do {
+ seq = read_seqcount_begin(&tk_core.seq);
+ /*
+ * Verify that the correlated clocksoure is related to
+ * the currently installed timekeeper clocksoure
+ */
+ if (tk->tkr_mono.clock != crs->related_cs)
+ return -ENODEV;
+
+ /*
+ * Try to get a timestamp from the device.
+ */
+ ret = crt->get_ts(crt);
+ if (ret)
+ return ret;
+
+ /*
+ * Convert the timestamp to timekeeper clock cycles
+ */
+ cycles = crs->convert(crs, crt->system_ts);
+
+ /* Convert to clock realtime */
+ base = ktime_add(tk->tkr_mono.base, tk_core.timekeeper.offs_real);
+ nsecs = timekeeping_convert_to_ns(&tk->tkr_mono, cycles);
+ crt->system_real = ktime_add_ns(base, nsecs);
+
+ /* Convert to clock raw monotonic */
+ base = tk->tkr_raw.base;
+ nsecs = timekeeping_convert_to_ns(&tk->tkr_raw, cycles);
+ crt->system_raw = ktime_add_ns(base, nsecs);
+
+ } while (read_seqcount_retry(&tk_core.seq, seq));
+ return 0;
+}
+
+/**
* do_gettimeofday - Returns the time of day in a timeval
* @tv: pointer to the timeval to be set
*

\
 
 \ /
  Last update: 2015-07-29 21:11    [W:0.073 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site