Messages in this thread | | | Subject | Re: [linux-sunxi] [RFC] ARM: dts: sunxi: Add regulators and board-specific operating points for LeMaker BananaPi | From | Hans de Goede <> | Date | Tue, 28 Jul 2015 17:29:14 +0200 |
| |
Hi,
On 07/28/2015 05:09 PM, Timo Sigurdsson wrote: > Hi, > > Hans de Goede schrieb am 28.07.2015 16:24: >> I've no problem with Timo submitting a cleaned up version of his >> patch and you taking that instead. I just wanted to point out that >> I do have a similar patch pending. > > Ok, I will do that. It might take a couple of days, though, as I will be moving > moving in the next few days as well. > > However, another question first then: What maximum voltage for the dcdc2 > regulator should we use then? You used 1.5V, I used 1.45V so far, which is what > Cubieboard 2 and Cubietruck use. > > But after the discussion about overvoltaged settings, I'm wondering whether we > should limit the regulartor (and not only the opp) to 1.40V as well? Or is > 1.45V ok for everybody here?
The datasheets lists a max cpu-voltage of 1.40V, so lets stick with that.
Regards,
Hans
| |