lkml.org 
[lkml]   [2015]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] PCI: host: pci-dra7xx: Disable pm_runtime on get_sync failure
Date
Fix the error handling code in case pm_runtime_get_sync fails. Now
when pm_runtime_get_sync fails pm_runtime_disable is invoked so that
there is no unbalanced pm_runtime_enable calls.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/host/pci-dra7xx.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index 80db09e..d8b6d66 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -384,7 +384,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
ret = pm_runtime_get_sync(dev);
if (IS_ERR_VALUE(ret)) {
dev_err(dev, "pm_runtime_get_sync failed\n");
- goto err_phy;
+ goto err_get_sync;
}

reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD);
@@ -401,6 +401,8 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)

err_add_port:
pm_runtime_put(dev);
+
+err_get_sync:
pm_runtime_disable(dev);

err_phy:
--
1.7.9.5


\
 
 \ /
  Last update: 2015-07-24 14:21    [W:0.223 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site