lkml.org 
[lkml]   [2015]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectlinux-next: manual merge of the mmc-uh tree with the imx-mxs tree
Hi Ulf,

Today's linux-next merge of the mmc-uh tree got conflicts in:

arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi

between commit:

82a5485b6aef ("ARM: dts: ventana: add UHS-I support for Ventana boards")

from the imx-mxs tree and commit:

849dea0a52d2 ("dts: imx6: fix sd card gpio polarity specified in device tree")

from the mmc-uh tree.

I fixed it up (see below) and can carry the fix as necessary (no action
is required).

--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au

diff --cc arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b8e35513aed2,4493f6e99330..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@@ -316,13 -316,10 +316,13 @@@
};

&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};

diff --cc arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 765c3a758ae0,a857d1294609..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@@ -322,13 -322,10 +322,13 @@@
};

&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};

diff --cc arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 1100aab4be54,1afe3385e2d2..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@@ -415,13 -415,10 +415,13 @@@
};

&usdhc3 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3p3v>;
+ no-1-8-v; /* firmware will remove if board revision supports */
status = "okay";
};



\
 
 \ /
  Last update: 2015-07-24 04:21    [W:0.788 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site