lkml.org 
[lkml]   [2015]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: ulpi: call put_device if device_register fails
On Thu, Jul 23, 2015 at 12:02:40AM -0500, Felipe Balbi wrote:
> Hi,
>
> On Wed, Jul 22, 2015 at 08:14:46PM -0700, Greg Kroah-Hartman wrote:
> > On Wed, Jul 22, 2015 at 09:04:40PM -0500, Felipe Balbi wrote:
> > > On Wed, Jul 22, 2015 at 02:39:34PM -0700, Greg Kroah-Hartman wrote:
> > > > On Tue, Jun 23, 2015 at 01:57:38PM +0300, Heikki Krogerus wrote:
> > > > > On Fri, Jun 19, 2015 at 01:12:36AM +0800, ChengYi He wrote:
> > > > > > put_device is required to release the last reference to the device.
> > > > > >
> > > > > > Signed-off-by: ChengYi He <chengyihetaipei@gmail.com>
> > > > > > ---
> > > > > > drivers/usb/common/ulpi.c | 4 +++-
> > > > > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
> > > > > > index 0e6f968..bd25bdb 100644
> > > > > > --- a/drivers/usb/common/ulpi.c
> > > > > > +++ b/drivers/usb/common/ulpi.c
> > > > > > @@ -184,8 +184,10 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> > > > > > request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
> > > > > >
> > > > > > ret = device_register(&ulpi->dev);
> > > > > > - if (ret)
> > > > > > + if (ret) {
> > > > > > + put_device(&ulpi->dev);
> > > > >
> > > > > If device_register returns failure, put_device has already been
> > > > > called. Check device_add in drivers/base/core.c.
> > > >
> > > > Yes, please read the function, which says:
> > > > * NOTE: _Never_ directly free @dev after calling this function, even
> > > > * if it returned an error! Always use put_device() to give up your
> > > > * reference instead.
> > > >
> > > > But, the problem is that the ulpi core doesn't "own" that struct device.
> > > > It comes from elsewhere. It comes from somewhere deep down in the dw3
> > > > core, which is where I lost the path. Something needs to be fixed in
> > > > dwc3_probe() to properly clean up the device if it fails, which is not
> > > > happening right now.
> > > >
> > > > So this patch would actually cause much bigger problems than fixing
> > > > anything, so it's wrong, but for a different reason than you are talking
> > > > about here.
> > > >
> > > > And ugh, the ulpi and dwc code binding together, what a mess, horrid...
> > >
> > > any suggestions ? DWC *is* the one implementing the bus. If there's a
> > > better way, we can certainly shuffle code around.
> >
> > As dwc is the only thing using the bus, why is it drivers/usb/core/ ?
>
> musb also has a SW-accessible ULPI bus. And, IIRC, so does DWC2 ;-)

But they aren't calling ulpi_register(), so how can they be using this
code?

> > And the error path here is broken, the bus should be creating the device
> > (i.e. no subsystem should ever be registering a device it did not
> > create), so that it can properly clean things up when stuff goes wrong.
> >
> > The whole subsys_init() is also a bad feeling that it's not architected
> > correctly, that shouldn't be needed, which is why I never took that
> > patch. Just noticed it came in through yours, I wanted it "broken" so
> > it would be fixed "properly" and not papered over like this.
>
> I just felt it would be better to 'fix' it for the -rc until it can be
> fixed *properly*. A follow up fix should incur no visible changes to
> drivers anyway.

I don't like fixes like this because no one now has any pressure to fix
it "properly". Are you doing that work? If not, who is?

thanks,

greg k-h


\
 
 \ /
  Last update: 2015-07-23 20:21    [W:0.061 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site