lkml.org 
[lkml]   [2015]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/6] mailbox: Add support for ST's Mailbox IP
From
On Thu, Jul 23, 2015 at 1:59 PM, Lee Jones <lee.jones@linaro.org> wrote:
>> On Fri, Jul 17, 2015 at 5:34 PM, Lee Jones <lee.jones@linaro.org> wrote:

>> > +static void sti_mbox_enable_channel(struct mbox_chan *chan)
>> > +{
>> > + struct sti_channel *chan_info = chan->con_priv;
>> > + struct sti_mbox_device *mdev = chan_info->mdev;
>> > + struct sti_mbox_pdata *pdata = dev_get_platdata(mdev->dev);
>> > + unsigned int instance = chan_info->instance;
>> > + unsigned int channel = chan_info->channel;
>> > + unsigned long flags;
>> > + void __iomem *base;
>> > +
>> > + base = mdev->base + (instance * sizeof(u32));
>> > +
>> Maybe have something simpler like MBOX_BASE(instance)? Or some inline
>> function to avoid this 5-lines ritual?
>
> I've checked and we can't do this, as the we need most (all?) of the
> intermediary variables too. No ritual just to get the final variable
> for instance.
>
OK. How about ?
#define MBOX_BASE(m, n) ((m)->base + (n) * 4)
void __iomem *base = MBOX_BASE(mdev, instance);


>> > + spin_lock_irqsave(&sti_mbox_chan_lock, flags);
>> > + mdev->enabled[instance] |= BIT(channel);
>> > + writel_relaxed(BIT(channel), base + pdata->ena_set);
>> > + spin_unlock_irqrestore(&sti_mbox_chan_lock, flags);
>> >
>> You don't need locking for SET/CLR type registers which are meant for
>> when they could be accessed by processors that can not share a lock.
>> So maybe drop the lock here and elsewhere.
>
> From what I can gather, I think we need this locking. What happens if
> we get scheduled between setting the enabled bit in our cache and
> actually setting the ena_set bit? We would be out of sync.
>
IIU what you mean... can't that still happen because of the _relaxed()?
Anyways my point was about set/clr type regs. And you may look at if
channel really needs disabling while interrupts are handled? I think
it shouldn't because either it is going to be a to-fro communication
or random broadcasts without any guarantee of reception. But of course
you would know better your platform.
BTW sti_mbox_channel_is_enabled() also needs to have locking around
enabled[] if you want to keep it. And maybe embed sti_mbox_chan_lock
inside sti_mbox_device.

>> However, you need some mechanism to check if you succeeded 'owning'
>> the channel by reading back what you write to own the channel (not
>> sure which is that register here). Usually we need that action and
>> verification when we assign a channel to some user.
>
> I don't think we need to do that with this driver. All of the
> allocation is controlled from within this code base. The channels are
> pre-allocated and written into the co-proc's Firmware.
>
OK

>> > + }
>> > +
>> Doesn't mbox->chans[i].con_priv need some locking here?
>
> Not that I can see. Would you mind explaining further please?
>
Not anymore, after the clarification that we don't need a 'break' statement.

cheers.


\
 
 \ /
  Last update: 2015-07-23 20:01    [W:0.339 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site