lkml.org 
[lkml]   [2015]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 3/3] ARM: dts: dra7: Add syscon-pllreset syscon to SATA PHY
Hi,

On 15/07/15 15:07, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@ti.com> [150715 04:24]:
>> Hi Roger,
>>
>> On Tuesday 02 June 2015 02:40 PM, Roger Quadros wrote:
>>> This register is required to be passed to the SATA PHY driver
>>> to workaround errata i783 (SATA Lockup After SATA DPLL Unlock/Relock).
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>>> ---
>>> arch/arm/boot/dts/dra7.dtsi | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
>>> index f03a091..260f300 100644
>>> --- a/arch/arm/boot/dts/dra7.dtsi
>>> +++ b/arch/arm/boot/dts/dra7.dtsi
>>> @@ -1135,6 +1135,7 @@
>>> ctrl-module = <&omap_control_sata>;
>>> clocks = <&sys_clkin1>, <&sata_ref_clk>;
>>> clock-names = "sysclk", "refclk";
>>> + syscon-pllreset = <&dra7_ctrl_core 0x3fc>;
>>
>> I think all users of syscon should be made child node of scm_conf. Tony and
>> Tero, is that right?

It can't be child of scm_conf as the address is outside it's range.
Looks like I have to add a new child to scm node that maps beyond
the dra7_pmx_core padconf address range.

>>
>> If so, then we might have to modify the driver too.
>
> Yeah there should not be much need to use syscon outside scm_conf
> area and for I2C devices. If there's some other misc register area
> in dra7 in addition to scm_conf then it might make sense to use it.
>
> But in general, for the SCM registers, just a normal loadable kernel
> driver module doing of_ioremap on a dedicated range of registers is
> always a better option :)
>

Lets take for example this register CTRL_CORE_SMA_SW_0.
It has the SATA PLL_SOFT_RESET bit, EMIF1/2 gating control bits
and ISOLATE bit.

I don't see this fitting in any driver except the syscon approach.

cheers,
-roger


\
 
 \ /
  Last update: 2015-07-15 16:01    [W:0.069 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site