lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] irqchip: bcm2835: If a parent interrupt is registered, chain from it.
Date
The BCM2836 (Raspberry Pi 2) uses two levels of interrupt handling
with the CPU-local interrupts being the root, so we need to register
ours as chained off of the CPU's local interrupt.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
.../brcm,bcm2835-armctrl-ic.txt | 22 ++++++++++++++++++++++
drivers/irqchip/irq-bcm2835.c | 20 ++++++++++++++++++--
2 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
index 7da578d..8363bc4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
@@ -5,6 +5,10 @@ The BCM2835 contains a custom top-level interrupt controller, which supports
controller, or the HW block containing it, is referred to occasionally
as "armctrl" in the SoC documentation, hence naming of this binding.

+The BCM2836 contains the same interrupt controller with the same
+interrupts, but the per-CPU interrupt controller is the root, and an
+interrupt there indicates that the ARMCTRL has an interrupt to handle.
+
Required properties:

- compatible : should be "brcm,bcm2835-armctrl-ic"
@@ -20,6 +24,12 @@ Required properties:
The 2nd cell contains the interrupt number within the bank. Valid values
are 0..7 for bank 0, and 0..31 for bank 1.

+Optional properties:
+- interrupt-parent : Specifies the parent interrupt controller when this
+ controller is the second level.
+- interrupts : Specifies the interrupt on the parent for this interrupt
+ controller to handle.
+
The interrupt sources are as follows:

Bank 0:
@@ -102,9 +112,21 @@ Bank 2:

Example:

+/* BCM2835, first level */
+intc: interrupt-controller {
+ compatible = "brcm,bcm2835-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+/* BCM2836, second level */
intc: interrupt-controller {
compatible = "brcm,bcm2835-armctrl-ic";
reg = <0x7e00b200 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
};
diff --git a/drivers/irqchip/irq-bcm2835.c b/drivers/irqchip/irq-bcm2835.c
index 382450a..dc6b159 100644
--- a/drivers/irqchip/irq-bcm2835.c
+++ b/drivers/irqchip/irq-bcm2835.c
@@ -97,6 +97,7 @@ struct armctrl_ic {
static struct armctrl_ic intc __read_mostly;
static void __exception_irq_entry bcm2835_handle_irq(
struct pt_regs *regs);
+static void bcm2835_chained_handle_irq(unsigned int irq, struct irq_desc *desc);

static void armctrl_mask_irq(struct irq_data *d)
{
@@ -143,7 +144,7 @@ static int __init armctrl_of_init(struct device_node *node,
struct device_node *parent)
{
void __iomem *base;
- int irq, b, i;
+ int irq, parent_irq, b, i;

base = of_iomap(node, 0);
if (!base)
@@ -169,7 +170,14 @@ static int __init armctrl_of_init(struct device_node *node,
}
}

- set_handle_irq(bcm2835_handle_irq);
+ parent_irq = irq_of_parse_and_map(node, 0);
+ if (!parent_irq) {
+ /* No parent IRQ, so we're the root interrupt controller */
+ set_handle_irq(bcm2835_handle_irq);
+ } else {
+ irq_set_chained_handler(parent_irq, bcm2835_chained_handle_irq);
+ }
+
return 0;
}

@@ -220,4 +228,12 @@ static void __exception_irq_entry bcm2835_handle_irq(
handle_IRQ(irq_linear_revmap(intc.domain, hwirq), regs);
}

+static void bcm2835_chained_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+ u32 hwirq;
+
+ while ((hwirq = get_next_armctrl_hwirq()) != ~0)
+ generic_handle_irq(irq_linear_revmap(intc.domain, hwirq));
+}
+
IRQCHIP_DECLARE(bcm2835_armctrl_ic, "brcm,bcm2835-armctrl-ic", armctrl_of_init);
--
2.1.4


\
 
 \ /
  Last update: 2015-07-14 04:01    [W:0.123 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site