lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: linux 4.2-rc1 broken Nokia N900
On Mon, Jul 13, 2015 at 10:34:21PM +0200, Pali Rohár wrote:
> On Monday 13 July 2015 22:28:35 Michael Welling wrote:
> > On Mon, Jul 13, 2015 at 07:09:06PM +0200, Pali Rohár wrote:
> > > Hello, here is my objdump of 4.2-rc2 version:
> > >
> > > 00000064 <omap2_mcspi_set_cs>:
> > > 64: e3003182 movw r3, #386 ; 0x182
> > > 68: e19030b3 ldrh r3, [r0, r3]
> > > 6c: e3130004 tst r3, #4
> > > 70: 0a000001 beq 7c
> > > <omap2_mcspi_set_cs+0x18> 74: e2711001 rsbs
> > > r1, r1, #1
> > > 78: 33a01000 movcc r1, #0
> > > 7c: e5902188 ldr r2, [r0, #392] ; 0x188
> > > 80: e3520000 cmp r2, #0
> > > 84: 012fff1e bxeq lr
> > > 88: e5923018 ldr r3, [r2, #24]
> > > 8c: e3510000 cmp r1, #0
> > > 90: 13c33601 bicne r3, r3, #1048576 ;
> > > 0x100000 94: 03833601 orreq r3, r3, #1048576
> > > ; 0x100000 98: e5823018 str r3, [r2,
> > > #24]
> > > 9c: e5902188 ldr r2, [r0, #392] ; 0x188
> > > a0: e5922000 ldr r2, [r2]
> > > a4: e582302c str r3, [r2, #44] ; 0x2c
> > > a8: e592302c ldr r3, [r2, #44] ; 0x2c
> > > ac: e12fff1e bx lr
> >
> > I have not been able to duplicate the failure on the hardware that I
> > have. I dug out my old Beagleboard and added an SPI registration to
> > the dts. This was the closest hardware that I had to the N900's
> > processor.
> >
> > What is the version of the gcc compiler you are using and where did
> > you get it from?
> >
>
> I'm using gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) from package
> gcc-4.6-arm-linux-gnueabi which is available on Ubuntu 12.04 LTS
> (version 4.6.3-1ubuntu5cross1.62).

I downloaded and compiled with this compiler and it still does not effect
the functionality of the targets that I have.

What flags (if any) are you passing to the compiler?

Here is my objdump with gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5):
00000074 <omap2_mcspi_set_cs>:
74: e59f304c ldr r3, [pc, #76] ; c8 <omap2_mcspi_set_cs+0x54>
78: e19030b3 ldrh r3, [r0, r3]
7c: e3130004 tst r3, #4
80: 0a000001 beq 8c <omap2_mcspi_set_cs+0x18>
84: e2711001 rsbs r1, r1, #1
88: 33a01000 movcc r1, #0
8c: e5903258 ldr r3, [r0, #600] ; 0x258
90: e3530000 cmp r3, #0
94: 012fff1e bxeq lr
98: e5932018 ldr r2, [r3, #24]
9c: e3510000 cmp r1, #0
a0: 13c22601 bicne r2, r2, #1048576 ; 0x100000
a4: 03822601 orreq r2, r2, #1048576 ; 0x100000
a8: e5832018 str r2, [r3, #24]
ac: e5903258 ldr r3, [r0, #600] ; 0x258
b0: e5933000 ldr r3, [r3]
b4: e583202c str r2, [r3, #44] ; 0x2c
b8: e5903258 ldr r3, [r0, #600] ; 0x258
bc: e5933000 ldr r3, [r3]
c0: e593202c ldr r2, [r3, #44] ; 0x2c
c4: e12fff1e bx lr
c8: 00000252 .word 0x00000252

>
> > For instance, I am using a 4.9.1 compiler that I built using Yocto.
> >
> > Also are you using devicetree or the old board file board-rx51.c?
>
> I'm using devicetree.
>
> --
> Pali Rohár
> pali.rohar@gmail.com




\
 
 \ /
  Last update: 2015-07-14 00:01    [W:0.093 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site