lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/3] usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Date
On 7/11/2015 12:29 PM, Felipe Balbi wrote:
> Hi,
>
> On Sat, Jul 11, 2015 at 05:17:32PM +0000, Subbaraya Sundeep Bhatta wrote:
>>>>>> Hi Felipe,
>>>>>>
>>>>>> Just an update on this.
>>>>>>
>>>>>> I'm trying to get this working with our latest IP with dwc3 from
>>>>>> your testing/next branch. It fails the usbtest with a problem
>>>>>> unrelated to this patch.
>>>>>> .
>>>>>> It passes on 4.1.1.
>>>>>>
>>>>>> I'll have to look into the failure but I won't get to it until next
>>>>>> week as I'm off the rest of this week.
>>>>>
>>>>> interesting... If you could post failure signature, I can help
>>>>> looking at it, but I guess it's too late to ask :-)
>>>>>
>>>>> thanks for helping though
>>>>>
>>>>
>>>>
>>>> Hi Felipe,
>>>>
>>>> Nevermind about my issue, it ended up being a setup-related problem.
>>>>
>>>> I actually do see the same error as you due to this series of patches.
>>>> Except I see it happening before even the first iteration. I get a
>>>> completion status of 1 for the Set Endpoint Transfer Resources
>>>> command. I'm not sure why this is.
>>>>
>>>> I don't see any conflict with any previous Transfer Complete.
>>
>> Same behavior at my end too. Fails before first iteration and I get
>> completion status of 1 for Set Endpoint Resource command. Attached the
>> logs of testing done with this patch and without this patch.
>> Without this patch I often see completion status of 1 for Set Endpoint
>> Transfer Resources command for Bulk and Isoc endpoints but test
>> proceeds because driver just logs command completion status and moves
>> on. We can revert this patch for time being. IP version is 2.90a.
>
> yeah, that's what I mean, it really seems like it's the IP misbehaving.
>
> John, let's try to figure out what's the root cause of this, we really
> want to use command completion status at some point, but for now we need
> to revert the patch :-(
>
> Let me know if you want me to log STARS ticket on your solvnet system.
>
> cheers
>

Hi Felipe,

We found the issue last week.

The start config command isn't getting called during SET_INTERFACE. Thus the transfer resource index isn't getting reset, and with multiple SET_INTERFACE commands it will eventually exhaust the resources.

I tried out a fix and it works for me. I'll send it out separately for review.

Also, I noticed that the trace message that shows control transfers doesn't show the SET_INTERFACE properly. Any idea why this is?

For example, here is the line in the trace that corresponds to the SET_INTERFACE:
irq/33-dwc3-10808 [003] d... 2443.494368: dwc3_ctrl_req: bRequestType 01 bRequest 0b wValue 0001 wIndex 0000 wLength 0

John



\
 
 \ /
  Last update: 2015-07-13 20:01    [W:0.089 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site