lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectApplied "regulator: da9210: Add optional interrupt support" to the regulator tree
The patch

regulator: da9210: Add optional interrupt support

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 4245746037e379dc9f1388e422d52001cd431921 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed, 24 Jun 2015 14:14:21 +0200
Subject: [PATCH] regulator: da9210: Add optional interrupt support

Add optional interrupt support to the da9210 regulator driver, to handle
over-current, under- and over-voltage, and over-temperature events.

Only the interrupt sources for which we handle events are unmasked, to
avoid interrupts we cannot handle.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
.../devicetree/bindings/regulator/da9210.txt | 4 ++
drivers/regulator/da9210-regulator.c | 75 ++++++++++++++++++++++
2 files changed, 79 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
index 3297c53cb915..7aa9b1fa6b21 100644
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -5,6 +5,10 @@ Required properties:
- compatible: must be "dlg,da9210"
- reg: the i2c slave address of the regulator. It should be 0x68.

+Optional properties:
+
+- interrupts: a reference to the DA9210 interrupt, if available.
+
Any standard regulator properties can be used to configure the single da9210
DCDC.

diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index f0489cb9018b..8e39f7457bc3 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -22,6 +22,8 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
@@ -120,6 +122,55 @@ static int da9210_get_current_limit(struct regulator_dev *rdev)
return da9210_buck_limits[sel];
}

+static irqreturn_t da9210_irq_handler(int irq, void *data)
+{
+ struct da9210 *chip = data;
+ unsigned int val, handled = 0;
+ int error, ret = IRQ_NONE;
+
+ error = regmap_read(chip->regmap, DA9210_REG_EVENT_B, &val);
+ if (error < 0)
+ goto error_i2c;
+
+ if (val & DA9210_E_OVCURR) {
+ regulator_notifier_call_chain(chip->rdev,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+ handled |= DA9210_E_OVCURR;
+ }
+ if (val & DA9210_E_NPWRGOOD) {
+ regulator_notifier_call_chain(chip->rdev,
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+ handled |= DA9210_E_NPWRGOOD;
+ }
+ if (val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT)) {
+ regulator_notifier_call_chain(chip->rdev,
+ REGULATOR_EVENT_OVER_TEMP, NULL);
+ handled |= val & (DA9210_E_TEMP_WARN | DA9210_E_TEMP_CRIT);
+ }
+ if (val & DA9210_E_VMAX) {
+ regulator_notifier_call_chain(chip->rdev,
+ REGULATOR_EVENT_REGULATION_OUT,
+ NULL);
+ handled |= DA9210_E_VMAX;
+ }
+ if (handled) {
+ /* Clear handled events */
+ error = regmap_write(chip->regmap, DA9210_REG_EVENT_B, handled);
+ if (error < 0)
+ goto error_i2c;
+
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+
+error_i2c:
+ dev_err(regmap_get_device(chip->regmap), "I2C error : %d\n", error);
+ return ret;
+}
+
/*
* I2C driver interface functions
*/
@@ -168,6 +219,30 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
}

chip->rdev = rdev;
+ if (i2c->irq) {
+ error = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+ da9210_irq_handler,
+ IRQF_TRIGGER_LOW |
+ IRQF_ONESHOT | IRQF_SHARED,
+ "da9210", chip);
+ if (error) {
+ dev_err(&i2c->dev, "Failed to request IRQ%u: %d\n",
+ i2c->irq, error);
+ return error;
+ }
+
+ error = regmap_update_bits(chip->regmap, DA9210_REG_MASK_B,
+ DA9210_M_OVCURR | DA9210_M_NPWRGOOD |
+ DA9210_M_TEMP_WARN |
+ DA9210_M_TEMP_CRIT | DA9210_M_VMAX, 0);
+ if (error < 0) {
+ dev_err(&i2c->dev, "Failed to update mask reg: %d\n",
+ error);
+ return error;
+ }
+ } else {
+ dev_warn(&i2c->dev, "No IRQ configured\n");
+ }

i2c_set_clientdata(i2c, chip);

--
2.1.4


\
 
 \ /
  Last update: 2015-07-13 13:41    [W:0.196 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site