lkml.org 
[lkml]   [2015]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/3] dt-bindings: pwm: add MediaTek display PWM bindings
On Mon, Jul 13, 2015 at 5:04 PM, YH Huang <yh.huang@mediatek.com> wrote:
> Document the device-tree binding of MediatTek display PWM.
> The PWM has one channel to control the backlight brightness for display.
> It supports MT8173 and MT6595.
>
> Signed-off-by: YH Huang <yh.huang@mediatek.com>
> ---
> .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
>
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> new file mode 100644
> index 0000000..aac29dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt
> @@ -0,0 +1,29 @@
> +MediaTek display PWM controller
> +
> +Required properties:
> + - compatible: should be "mediatek,<name>-disp-pwm":
> + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC.
> + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC.
> + - reg: physical base address and length of the controller's registers.
> + - #pwm-cells: must be 2. See pwm.txt in this directory for a description of
> + the cell format.
> + - clocks: phandle and clock specifier of the PWM reference clock.
> + - clock-names: must contain the following:
> + - "main": clock used to generate PWM signals.
> + - "mm": sync signals from the modules of mmsys.
> + - pinctrl-names: Must contain a "default" entry.
> + - pinctrl-0: One property must exist for each entry in pinctrl-names.
> + See pinctrl/pinctrl-bindings.txt for details of the property values.
> +
> +Example:
> + pwm0: pwm@1401e000 {
> + compatible = "mediatek,mt8173-disp-pwm",
> + "mediatek,mt6595-disp-pwm";
> + reg = <0 0x1401e000 0 0x1000>;
> + #pwm-cells = <2>;
> + clocks = <&mmsys CLK_MM_DISP_PWM026M>,
> + <&mmsys CLK_MM_DISP_PWM0MM>;
> + clock-names = "main", "mm";
> + pinctrl-names = "default";
> + pinctrl-0 = <&disp_pwm0_pins>;
> + };

Please show an example consumer of the pwm phandle to show how to set
the two properties required by the #pwm-cells.
Although the pwm-specifier typically encodes the chip-relative PWM
number and the PWM period in nanoseconds, it is technically controller
specific.

In fact, since the mtk-disp-pwm does not have a chip-relative PWM
number, could we in fact set #pwm-cells = <1>, and only specify the
requested PWM period?

-Dan


> --
> 1.8.1.1.dirty
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek


\
 
 \ /
  Last update: 2015-07-13 12:41    [W:0.067 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site