lkml.org 
[lkml]   [2015]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/12] mtd: nand: omap: Move NAND write protect code from GPMC to NAND driver
Date
The write protect (WP) pin is only used for NAND devices. So move
the code into the NAND driver.

Get rid of gpmc_configure() as it is no longer used.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/mach-omap2/gpmc-nand.c | 4 ----
drivers/memory/omap-gpmc.c | 30 ----------------------------
drivers/mtd/nand/omap2.c | 23 +++++++++++++++++++++
include/linux/omap-gpmc.h | 3 ---
include/linux/platform_data/mtd-nand-omap2.h | 1 +
5 files changed, 24 insertions(+), 37 deletions(-)

diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index ff578d4..9cb8ce6 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -117,10 +117,6 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
if (err < 0)
goto out_free_cs;

- err = gpmc_configure(GPMC_CONFIG_WP, 0);
- if (err < 0)
- goto out_free_cs;
-
if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
err = -EINVAL;
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index dd55a51..650f9b8 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -151,7 +151,6 @@

#define GPMC_DEVICETYPE_NOR 0
#define GPMC_DEVICETYPE_NAND 2
-#define GPMC_CONFIG_WRITEPROTECT 0x00000010
#define WR_RD_PIN_MONITORING 0x00600000

/* ECC commands */
@@ -987,35 +986,6 @@ void gpmc_cs_free(int cs)
}
EXPORT_SYMBOL(gpmc_cs_free);

-/**
- * gpmc_configure - write request to configure gpmc
- * @cmd: command type
- * @wval: value to write
- * @return status of the operation
- */
-int gpmc_configure(int cmd, int wval)
-{
- u32 regval;
-
- switch (cmd) {
- case GPMC_CONFIG_WP:
- regval = gpmc_read_reg(GPMC_CONFIG);
- if (wval)
- regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
- else
- regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
- gpmc_write_reg(GPMC_CONFIG, regval);
- break;
-
- default:
- pr_err("%s: command not supported\n", __func__);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_configure);
-
void gpmc_get_mem_resource(struct resource *res)
{
res->start = phys_base;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 3d0f73c..25a3d05 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -140,6 +140,9 @@
#define GPMC_IRQ_FIFOEVENT BIT(0)
#define GPMC_IRQ_TERMCOUNT BIT(1)

+/* GPMC_CONFIG register bits */
+#define GPMC_CONFIG_WRITEPROTECT BIT(4)
+
/* GPMC register offsets */
#define GPMC_REVISION 0x00
#define GPMC_SYSCONFIG 0x10
@@ -215,6 +218,22 @@ struct omap_nand_info {
};

/**
+ * omap_nand_writeprotect - Control the WP line to the NAND chip
+ */
+static void omap_nand_writeprotect(struct omap_nand_info *info, bool on)
+{
+ u32 val;
+
+ val = readl(info->reg.gpmc_config);
+ if (on)
+ val &= GPMC_CONFIG_WRITEPROTECT; /* WP pin is active low */
+ else
+ val |= GPMC_CONFIG_WRITEPROTECT;
+
+ writel(val, info->reg.gpmc_config);
+}
+
+/**
* omap_prefetch_enable - configures and starts prefetch transfer
* @cs: cs (chip select) number
* @fifo_th: fifo threshold to be used for read/ write
@@ -1713,6 +1732,7 @@ static void gpmc_update_nand_reg(struct omap_nand_info *info)
int cs = info->gpmc_cs;
void __iomem *gpmc_base = info->gpmc_base;

+ reg->gpmc_config = gpmc_base + GPMC_CONFIG;
reg->gpmc_status = gpmc_base + GPMC_STATUS;
reg->gpmc_irqstatus = gpmc_base + GPMC_IRQSTATUS;
reg->gpmc_irqenable = gpmc_base + GPMC_IRQENABLE;
@@ -2141,6 +2161,9 @@ static int omap_nand_probe(struct platform_device *pdev)
nand_chip->ecc.layout = ecclayout;

scan_tail:
+ /* turn off write protect */
+ omap_nand_writeprotect(info, false);
+
/* second phase scan */
if (nand_scan_tail(mtd)) {
err = -ENXIO;
diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index 36f33ba..d13e172 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -10,8 +10,6 @@
#include <linux/platform_data/gpmc-omap.h>
#include <linux/ioport.h>

-#define GPMC_CONFIG_WP 0x00000005
-
extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
struct gpmc_settings *gpmc_s,
struct gpmc_device_timings *dev_t);
@@ -31,7 +29,6 @@ extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t,
extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
-extern int gpmc_configure(int cmd, int wval);
extern void gpmc_read_settings_dt(struct device_node *np,
struct gpmc_settings *p);

diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index 4427f92..e9b16b5 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -45,6 +45,7 @@ enum omap_ecc {
};

struct gpmc_nand_regs {
+ void __iomem *gpmc_config;
void __iomem *gpmc_status;
void __iomem *gpmc_irqstatus;
void __iomem *gpmc_irqenable;
--
2.1.4


\
 
 \ /
  Last update: 2015-07-10 14:41    [W:0.168 / U:1.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site