lkml.org 
[lkml]   [2015]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/7] ARM: bcm2835: Add a Raspberry Pi-specific clock driver.
On Mon, 08 Jun 2015, Eric Anholt wrote:

> Unfortunately, the clock manager's registers are not accessible by the
> ARM, so we have to request that the firmware modify our clocks for us.
>
> This driver only registers the clocks at the point they are requested
> by a client driver. This is partially to support returning
> -EPROBE_DEFER when the firmware driver isn't supported yet, but it
> also avoids issues with disabling "unused" clocks due to them not yet
> being connected to their consumers in the DT.
>
> v2: Declare the mutex static (from review by Baruch Siach), merge
> description and copyright comments.
>
> v3: Update for new rpi firmware API. Update the compatible string.
> Make the firmware handle be under a vendor-namespaced property.
> Make the DT indices match the firmware clock IDs. Move the driver
> under the firmware driver's Kconfig, since it requires it. Move a
> container_of() from 2 callers into the callee.
>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-raspberrypi.c | 242 ++++++++++++++++++++++++++++++++++++++++++

This is not an "ARM" patch.

The subject line needs to reflect the subsystem you are submitting to.

`git log --oneline -- <subsystem>`


\
 
 \ /
  Last update: 2015-06-09 12:21    [W:0.161 / U:1.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site