lkml.org 
[lkml]   [2015]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv3] ARM: dts: odroidxu3: Enable USB3 regulators
On 7 June 2015 at 08:02, Krzysztof Kozlowski <k.kozlowski@samsung.com> wrote:
> W dniu 29.05.2015 o 23:30, Anand Moon pisze:
>> Enable regulator for usbdrd3_0 and usbdrd3_1.
>> Looking at the schematic pin diagram for MAX77802
>> USB3_0 and USB3_1 is regulated by LDO9 and LD011.
>>
>> Fix the boot message of failed.
>> [ 3.503539] exynos-dwc3 usb@12000000: Looking up vdd33-supply from device tree
>> [ 3.503556] exynos-dwc3 usb@12000000: Looking up vdd33-supply property in node /usb@12000000 failed
>> [ 3.503568] usb@12000000 supply vdd33 not found, using dummy regulator
>> [ 3.509154] exynos-dwc3 usb@12000000: Looking up vdd10-supply from device tree
>> [ 3.509170] exynos-dwc3 usb@12000000: Looking up vdd10-supply property in node /usb@12000000 failed
>> [ 3.509181] usb@12000000 supply vdd10 not found, using dummy regulator
>> [ 3.917548] exynos-dwc3 usb@12400000: Looking up vdd33-supply from device tree
>> [ 3.917565] exynos-dwc3 usb@12400000: Looking up vdd33-supply property in node /usb@12400000 failed
>> [ 3.917578] usb@12400000 supply vdd33 not found, using dummy regulator
>> [ 3.922731] exynos-dwc3 usb@12400000: Looking up vdd10-supply from device tree
>> [ 3.922747] exynos-dwc3 usb@12400000: Looking up vdd10-supply property in node /usb@12400000 failed
>>
>> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
>
> The patch no longer applies because of creation of common Odroid DTSI.
> Can you rebase it on Kukjin's for-next?
>
> Best regards,
> Krzysztof
>

Hi Krzysztof

Ok will do this.

-Anand Moon
>


\
 
 \ /
  Last update: 2015-06-07 05:21    [W:0.066 / U:0.052 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site