Messages in this thread | | | Date | Sat, 06 Jun 2015 23:33:05 +0300 | From | Dmitry Tunin <> | Subject | Re: [PATCH] ath3k: Add support of 0489:e076 AR3012 device |
| |
06.06.2015 20:25, Dmitry Tunin пишет: > BugLink: https://bugs.launchpad.net/bugs/1462614 > > This device requires new firmware files > AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to > /lib/firmware/ar3k/ that are not included in linux-firmware yet. > > T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0489 ProdID=e076 Rev= 0.01 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> > Cc: stable@vger.kernel.org > --- > drivers/bluetooth/ath3k.c | 2 ++ > drivers/bluetooth/btusb.c | 1 + > 2 files changed, 3 insertions(+) > > diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c > index 8c81af6..ee64764 100644 > --- a/drivers/bluetooth/ath3k.c > +++ b/drivers/bluetooth/ath3k.c > @@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = { > { USB_DEVICE(0x0489, 0xe057) }, > { USB_DEVICE(0x0489, 0xe056) }, > { USB_DEVICE(0x0489, 0xe05f) }, > + { USB_DEVICE(0x0489, 0xe076) }, > { USB_DEVICE(0x0489, 0xe078) }, > { USB_DEVICE(0x04c5, 0x1330) }, > { USB_DEVICE(0x04CA, 0x3004) }, > @@ -137,6 +138,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = { > { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 94c6c04..c9be776 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -179,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = { > { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 }, > + { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 }, > { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 }, I added /sys/kernel/debug/usb/devices when firmware was not loaded. When I added firmware files it shows
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Shall I change the commit message, or is it OK?
| |